Author Topic: Adding Cruise Control (Read 6122 times)

Poooobaa · « **on:** August 15, 2008, 03:58:02 PM »

Any write-ups or how-to's. I see others have asked. Has no one done this? I bought a so called complete setup off ebay but just looking at things has me questioning a few items like the throttle cable hook up. Anybody seen something on this on other boards or sites? Thanks.

BlackBMWs · « **Reply #1 on:** September 17, 2009, 10:01:46 PM »

Quote from: Poooobaa;54950

Any write-ups or how-to's. I see others have asked. Has no one done this? I bought a so called complete setup off ebay but just looking at things has me questioning a few items like the throttle cable hook up. Anybody seen something on this on other boards or sites? Thanks.

+1 :cool:

roundel318 · « **Reply #2 on:** September 18, 2009, 11:24:42 AM »

I think I recall some writeups around the net, they aren't new, so it might take some searching.
I know there is a mounting bracket for the throttle cable assy that mounts somewhere in the engine bay that could be missing?

DaveM-sport · « **Reply #3 on:** September 20, 2009, 12:30:21 PM »

I've fitted it to my 318iS

I used an E36 throttle cable if I remember correctly as it was a little better fit in regards length

Other than that it's all plug and play if you have
The clutch switch and bracket
ECU
Stalk
Control unit

AcSchnitzer318is · « **Reply #4 on:** September 20, 2009, 10:39:36 PM »

Half way down the page... it's still on my list of to do's.

Cruise Retrofit

JP 91iS · « **Reply #5 on:** September 22, 2009, 11:06:45 PM »

Quote from: AcSchnitzer318is;78691

Half way down the page... it's still on my list of to do's.

Cruise Retrofit

This is the info I followed to do mine. As far as I can remember its all plug n play. Except you'll need the E36 M42 cruise cable, PN: 65-71-8-357-087. The actuator mount bracket wouldn't fit on my airbox mounts (not sure why its different but it is), so I've read the E36 M42 mount works but can't confirm it.