Author Topic: Melted a coil??? wiring issues... (Read 2691 times)

Funkmasta · « **on:** June 19, 2006, 10:58:23 PM »

So I melted #4 coil on my 91 M42, how does this happen? and why #4 and the other 3 are fine? I am pretty sure something is messed up with my wiring. I will post a photo of my battery distribution block...

Funkmasta · « **Reply #1 on:** June 19, 2006, 11:17:17 PM »

here is a pic of my distribution block...
still not sure how I melted #4 coil though

nickmpower · « **Reply #2 on:** June 20, 2006, 02:48:54 AM »

damn joe, i wish i could help you out. i dont have a license (story is on bimmer forums if you want) but you are welcome to take a look at my car at autohaus if you want, i might even have it home in the next few days.

what was wrong with the old engine btw? i might want it

D. Clay · « **Reply #3 on:** June 20, 2006, 11:04:19 AM »

Possibly it's time had come. Nothing last's forever. Per the old expression: "When you hear hoofbeats, think horses - not zebra's." Now if the next one melts.....
You've checked the wiring for shorts, especially the coil connectors. Might want to consider replacing all four coils just to save the trouble with the other three that probably aren't far behind. It did need a motor and a wiring harness.