Author Topic: 7 psi reliably on stock internals? (Read 4242 times)

Danny707 · « **on:** October 09, 2008, 09:25:59 PM »

On 91 octane without water injection?

Discuss.

Boosted E30 · « **Reply #1 on:** October 09, 2008, 10:15:24 PM »

ya for sure stock will hold 7 for a while head gasket will be the first to go though but everything else should deffinatly hold it

Danny707 · « **Reply #2 on:** October 10, 2008, 12:46:07 AM »

Could you explain more throughly?

George77 · « **Reply #3 on:** October 10, 2008, 08:20:38 PM »

7psi with a good tuning and it will last forever.I'm running 12psi with spikes of 13 when he boost hits and no problem so far

EN318isPDX · « **Reply #4 on:** October 10, 2008, 09:53:27 PM »

Why didnt you ask on R3V? You love to farm up your post count there.. this is the most non useless thread ive ever seen of danny.. congrats danny you are growing up

Boosted E30 · « **Reply #5 on:** October 10, 2008, 10:43:32 PM »

ive run 16psi on stock internals and nothing broke but that was only short runs the bottom end pistons rods crank hasnt broken on me yet just the top end ive had problem with

Jimmy Lewis · « **Reply #6 on:** October 10, 2008, 10:44:41 PM »

Quote from: EN318isPDX;58258

Why didnt you ask on R3V? You love to farm up your post count there.. this is the most non useless thread ive ever seen of danny.. congrats danny you are growing up

roflcopter.

(probably not my most useless post)

Danny707 · « **Reply #7 on:** October 10, 2008, 11:46:54 PM »

Quote from: EN318isPDX;58258

Why didnt you ask on R3V? You love to farm up your post count there.. this is the most non useless thread ive ever seen of danny.. congrats danny you are growing up

Yadayada.

Nothing new.

Useless post.

GrindCulture · « **Reply #8 on:** October 16, 2008, 02:03:51 PM »

A few guys over here are running eaton superchargers pushing in about 8psi on stock internals, 205bhp and 180ftlb sounds nice to me