Author Topic: vacuum  (Read 2092 times)

ClodKing

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 150
    • View Profile
vacuum
« on: April 25, 2008, 12:20:51 PM »
How many vacuum lines are there on the M42??

I asked for part numbers on bimmer forums, and was told to come here.

I was on realoem.com, and I could only find two part #'s for a vacuum line, and found a good dozen or so for coolant lines...

I though I saw for sure atleast 3 vacuum lines... howcome I cannot find them on realoem.com??

Any help would be great.

tjts1

  • Legendary
  • ******
  • Thank You
  • -Receive: 5
  • Posts: 1109
    • View Profile
vacuum
« Reply #1 on: April 25, 2008, 12:37:13 PM »
Nobody knows for sure but its a lot. Some of them double as both vacuum and coolant hoses. Others don't.
http://www.m42club.com/forums/showthread.php?t=2742
The problem is bmw created a coolant circuit from the side of the head to a pipe underneath intake manifold to run hot coolant through 4 heat exchangers. 2 for the throttle body, 1 for the idle control valve and 1 for the crankcase ventilation. The last 2 involve both coolant and vac hoses some of which are cross overs.
« Last Edit: April 25, 2008, 12:39:41 PM by tjts1 »
Sold but not forgotten

This is whats wrong with your car.
http://www.m42club.com/forums/showthread.php?t=2742
[/thread]

Frankie

  • Full Member
  • ***
  • Thank You
  • -Receive: 0
  • Posts: 165
    • View Profile
vacuum
« Reply #2 on: April 25, 2008, 02:03:17 PM »
I ripped of the throtte body heater hose mess and only 2 vacuum lines remained.

PaulC

  • Jr. Member
  • **
  • Thank You
  • -Receive: 0
  • Posts: 93
    • View Profile
vacuum
« Reply #3 on: April 26, 2008, 12:19:45 AM »
I call it Medusa's wig.