Author Topic: Shifter Linkage (Read 2544 times)

EN318isPDX · « **on:** October 01, 2007, 02:54:11 PM »

hey for some reason i have a bent shift linkage and a non bent one.. someone must have unbent it because i remember the shift linkage having a bent rod.. does anyone have a picture of how the shift linkage connects to the selector red and the shifter. i cant get the bent one to line up but yet the unbent one works..

318iSdaniel · « **Reply #1 on:** October 01, 2007, 07:50:28 PM »

see if this helps.
http://www.pelicanparts.com/bmw/techarticles/E36-Shift_Bushings/E36-Shift_Bushings.htm

KenC · « **Reply #2 on:** October 01, 2007, 09:45:17 PM »

My Z4 lever was straight. Are you certain that it's the stock one?

EN318isPDX · « **Reply #3 on:** October 02, 2007, 01:14:15 PM »

Quote from: 318iSdaniel;34728

see if this helps.
http://www.pelicanparts.com/bmw/techarticles/E36-Shift_Bushings/E36-Shift_Bushings.htm

thanks man those pictures really helped! Still have minor issue cannot shift into lower gears, gotta adjust the pitch on the back side! Should be fixed today! And for the other guy, shift linkage and shift lever are different.