Author Topic: Camshaft Position Sensor and ignition tables (Read 2388 times)

m44power · « **on:** April 18, 2007, 03:41:55 PM »

im runing my m42 with a m44 wiring and ecu i have a problem with my camshaft postition sensor there are differences for the 2 engines m42 sensor reads from exsuast cam an m44 reads from intake cam with a special disk and it looks like E46's sensor i need a solution for this one im thinking to swap the m44 timing cover cam gear impulse disk and sensor can be work ? any ideas?

m44power · « **Reply #1 on:** April 18, 2007, 03:46:15 PM »

i think is gone work but i need some imformation about m42 and m44 cams and characteristics just to know if is similar timing

if it is and uper chain case fits in m42 head its just the solution of my problem

tim_s · « **Reply #2 on:** April 18, 2007, 04:32:58 PM »

yeah i've done this before. fit m44 cover, sensor, cam gears with the m42 head and cam and all will work fine.

m44power · « **Reply #3 on:** April 18, 2007, 04:45:44 PM »

a big thank you!!!!
btw your engine rocks!