Author Topic: M42 E30 Turbo Kit - Complete  (Read 4012 times)

Balleristic31

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 26
    • View Profile
M42 E30 Turbo Kit - Complete
« on: July 08, 2022, 01:18:19 PM »
For sale is the entirety of the turbo kit just removed from my M42 318is E30. Decided to go a different direction with the powerplant of the car. Kit was run for approximately ~10k miles with the Ebay turbo. Garret turbo is zero (0) miles. Originally this was a kit that I purchased from JakeB on R3vlimited about 4 years ago. I added the stainless-steel manifold, downpipe, and purchased both turbos separately. Kit was never dyno’d but I’d expect about 200-220HP.

Please see exhaustive list of components included below. This is 100% of everything included in the photos.

 

- Zero Mile Factory Remanufactured Garrett 48.48AR T3 Turbo

- 10k Mile Ebay .48/.48 AR Turbo

- Good-n-Tight Custom TIG Welded SS Tubular T3 Turbo Manifold (minor MIG’d repairs)

- 2.5” In/Out Intercooler

- Custom TIG Welded Stainless-Steel Downpipe

- JakeB Mild-Steel Downpipe (Needs flange repair, flange included)

- Front Intercooler Mounting Bracket and Hardware

- Rare Custom Phenolic M42 Intake Manifold Spacer (Reduces charge temps)

- JakeB M42 175ECU Turbo Chip

- Four (4) 42LB Bosch Injectors

- Two (2) 2.5” Exhaust Flex Joints

- VDO Boost Gauge & Light

- Lower M42 Oil Pan with Turbo Oil Drain

- Turbo Oil Drain Hoss, & Gasket

- Eight (8) Shown Black Silicone Charge Pipe Hoses

- Turbo Bypass Valve, Hoses, & Clamps

- Foam Air Filter

- Air Filter Adapter for AFM

- Twelve (12) Charge Pipe Clamps

- New Reflex Exhaust T3 Turbo gasket

- Innovate LC-1 Wideband Controller & Gauge (could use harness work)

- Electric Fan Relay Harnes & Temp Sender

- 4 NGK 7 Spark Plugs

- Vacuum Tee for Boost Gauge & Bypass Valve

- Braided Turbo Oil High Pressure Feed Line

- Extra T3 Turbo Exhaust Housing

- 2.5” Turbo V-band Exhaust Flange/Housing

- Three and a half (3.5) Exhaust V-band clamps

- Oil Catch Can and Breather Hose

- Various Worm Clamps

 

PRICE IS SET AT $2500 PLUS+ SHIPPING TO THE LOWER 48 STATES OR BEST OFFER


If a serious potential buyer has questions about the kit, pricing, additional phots or shipping, please feel free to PM/DM me here or send an email to Nicholas.brema@gmail.com.

Thank you for your interest!

FAC9D9C6-80A6-4D4F-927A-A49B49E61321 by Nick Brema, on Flickr
IMG_6022 by Nick Brema, on Flickr
IMG_4758 by Nick Brema, on Flickr
IMG_4760 by Nick Brema, on Flickr
IMG_4765 by Nick Brema, on Flickr
IMG_4766 by Nick Brema, on Flickr
IMG_4761 by Nick Brema, on Flickr
« Last Edit: August 19, 2022, 04:33:13 PM by Balleristic31 »

YODI

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 1
  • Freshly Registered!
    • View Profile
Re: M42 E30 Turbo Kit - Complete
« Reply #1 on: July 08, 2022, 04:36:51 PM »
So excited until I realised you are in the USA and it's for LHD.

Balleristic31

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 26
    • View Profile
Re: M42 E30 Turbo Kit - Complete
« Reply #2 on: July 24, 2022, 03:19:24 PM »
Price drop to $2800

Balleristic31

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 26
    • View Profile
Re: M42 E30 Turbo Kit - Complete
« Reply #3 on: August 04, 2022, 01:46:12 PM »
Price drop to $2700. Motivated to sell and will consider parting if necessary.

Balleristic31

  • Newbie
  • *
  • Thank You
  • -Receive: 0
  • Posts: 26
    • View Profile
Re: M42 E30 Turbo Kit - Complete
« Reply #4 on: August 19, 2022, 04:33:35 PM »
Price Drop to $2500.

keflaman

  • Administrator
  • Hero Member
  • *****
  • Thank You
  • -Receive: 35
  • Posts: 929
    • View Profile
Re: M42 E30 Turbo Kit - Complete
« Reply #5 on: September 16, 2022, 05:55:52 PM »
And...sold. :)