Author Topic: weitec suspension kit (Read 4869 times)

gundy318 · « **on:** April 21, 2007, 11:27:25 AM »

Any opinions on weitec suspension kits? I'm looking at the 60/40 drop to get rid of the wheel gap but am worried that might be a little too much. Anyone know about the spring rates? Anyone else go with a 60/40 or something similar? thanks

ten2doyle102 · « **Reply #1 on:** April 24, 2007, 11:32:51 PM »

I dont think that you will have to worry to much about the drop unless the spring rates are weak. i have about a 2in drop all around and it drives pretty well. I have heard that some people have it lowered so that the oil pan is only 3in or so off the ground (equals about a 2.5" drop in the front). if your really worried about the oil pan, there is a company that sells skid plate for about $185. the site is 666fabrication.com

Gunni · « **Reply #2 on:** April 25, 2007, 04:26:59 AM »

Weitec is good, I have that with some coilover conversion springs,
Weitec is owned by KW if that tells you anything,.

Email me and I can get you the spring rates on a specific kit you are interested in

StreetSpec_iS · « **Reply #3 on:** April 25, 2007, 04:36:17 AM »

i got a weitec 60/60 in the iS. mated with koni's and whiteline sways. it feels solid but not jarry.

gundy318 · « **Reply #4 on:** April 25, 2007, 09:03:30 AM »

Quote from: ten2doyle102;24452

I dont think that you will have to worry to much about the drop unless the spring rates are weak.

So how weak is too weak?

Frankie · « **Reply #5 on:** May 21, 2007, 01:50:35 PM »

I bought a 60/40 Ultra GT set (springs and shocks) and it works quite nice in race track. However, it is too stiff for daily use at least to my opinion.

16v of Fury · « **Reply #6 on:** May 21, 2007, 05:21:30 PM »

Where can people in the US buy Weitec / KW springs?

Author Topic: weitec suspension kit (Read 4869 times)

16v of Fury