« previous next »
Pages: [1]   Go Down

Author Topic: E36 exhaust on e30?  (Read 3190 times)

Froos

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 4
  • Posts: 300
    • View Profile
E36 exhaust on e30?
« on: June 08, 2016, 02:20:47 PM »
Hello, will the middle exhaust fit somewhat? I can cut and weld but is there any hope in modifying it to fit an e30? I recon the end part will not work at all? Problem is i cant find a usable e30 unit and since headers are the same i was hoping the e36 could work
Logged
318i saloon base,lowered 40mm, alpinweiss2,535i rubbers,powerflex all round,6 for 6 goodridge, M3 caster rubbers, elec fan, carbon stud braces, CatCams, 8,4Kg flywheel ,ITB\'s, 3:73LSD

Froos

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 4
  • Posts: 300
    • View Profile
Re: E36 exhaust on e30?
« Reply #1 on: June 11, 2016, 10:54:24 AM »
Really nobody ever did this?
Logged
318i saloon base,lowered 40mm, alpinweiss2,535i rubbers,powerflex all round,6 for 6 goodridge, M3 caster rubbers, elec fan, carbon stud braces, CatCams, 8,4Kg flywheel ,ITB\'s, 3:73LSD

Froos

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 4
  • Posts: 300
    • View Profile
Re: E36 exhaust on e30?
« Reply #2 on: June 12, 2016, 07:14:18 AM »
So here they are, looks pretty incompatible...
Logged
318i saloon base,lowered 40mm, alpinweiss2,535i rubbers,powerflex all round,6 for 6 goodridge, M3 caster rubbers, elec fan, carbon stud braces, CatCams, 8,4Kg flywheel ,ITB\'s, 3:73LSD

Darky

  • Hero Member
  • *****
  • Thank You
  • -Receive: 23
  • Posts: 630
    • View Profile
Re: E36 exhaust on e30?
« Reply #3 on: June 13, 2016, 01:48:06 AM »
Looks like e36 is just longer.

But are the muffler dimensions similar?
Logged

Froos

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 4
  • Posts: 300
    • View Profile
Re: E36 exhaust on e30?
« Reply #4 on: June 14, 2016, 05:04:11 PM »
Found a e36 318ti exhaust, early type, ill see if it fits
Logged
318i saloon base,lowered 40mm, alpinweiss2,535i rubbers,powerflex all round,6 for 6 goodridge, M3 caster rubbers, elec fan, carbon stud braces, CatCams, 8,4Kg flywheel ,ITB\'s, 3:73LSD

Froos

  • Sr. Member
  • ****
  • Thank You
  • -Receive: 4
  • Posts: 300
    • View Profile
Re: E36 exhaust on e30?
« Reply #5 on: July 11, 2016, 01:33:58 PM »
Long story short, 318ti compact e36 does not fit....
Logged
318i saloon base,lowered 40mm, alpinweiss2,535i rubbers,powerflex all round,6 for 6 goodridge, M3 caster rubbers, elec fan, carbon stud braces, CatCams, 8,4Kg flywheel ,ITB\'s, 3:73LSD
Pages: [1]   Go Up
« previous next »