« previous next »
Pages: [1]   Go Down

Author Topic: E30 exhaust manifold question  (Read 2340 times)

Venom

  • Newbie
  • *
  • Thank You
  • -Receive: 2
  • Posts: 30
  • Freshly Registered!
    • View Profile
E30 exhaust manifold question
« on: February 26, 2014, 08:50:48 AM »
People, just a question on the below (taken from http://realoem.com/bmw/showparts.do?...54&hg=11&fg=50 )



What's the point in the screws (no. 3) in the manifold? Not seen it it later model BMW's.
Logged

Warsteiner

  • Hero Member
  • *****
  • Thank You
  • -Receive: 21
  • Posts: 576
    • View Profile
Re: E30 exhaust manifold question
« Reply #1 on: February 26, 2014, 09:23:44 AM »
Some headers have sampling ports for testing CO emissions. That's what those screws close off.

Cheers,
~Ralph
Logged

Venom

  • Newbie
  • *
  • Thank You
  • -Receive: 2
  • Posts: 30
  • Freshly Registered!
    • View Profile
Re: E30 exhaust manifold question
« Reply #2 on: February 26, 2014, 10:10:33 AM »
Thanks Ralph , had a feeling it was that or something to do with compression!
Logged

DesktopDave

  • Administrator
  • Legendary
  • *****
  • Thank You
  • -Receive: 60
  • Posts: 5076
  • Lives in the 80s
    • View Profile
    • The Iconic BMW
Re: E30 exhaust manifold question
« Reply #3 on: February 26, 2014, 04:26:39 PM »
There have been reports of later exhaust manifolds getting visual fails from Californian emissions stations, if you can believe it. It seems that BMW welded those four bungs shut at the factory, and nobody has successfully proved that this is an OEM modification.
Logged
'08 Karmesinrot 128i 6MT
'86 Zinnoberrot 635CSi (M30B32/G265/3.46 torsen LSD)

Sold: '97 Montrealblau 318iS, '91 Brilliantrot 318i, '91 Brilliantrot 318iS
Pages: [1]   Go Up
« previous next »