Author Topic: Quick Lower Pan Gasket Question... (Read 2475 times)

Alpine003 · « **on:** November 09, 2006, 04:24:07 PM »

I just received my lower pan gasket in the mail and it already had some silicone type substance on the area's where you're suppose to put gasket sealant I'm assuming.

Can anyone confirm which areas need the sealant on the gasket? Pics or diagram would be great.

D. Clay · « **Reply #1 on:** November 09, 2006, 05:56:10 PM »

Mine was like this and was just coated gasket paper - no sticky on it.

FL318is · « **Reply #2 on:** November 09, 2006, 06:44:25 PM »

We used a gasket sealant on the seal and some pink stuff (not loc-tite) on the bolt threads. And remember, don't laugh at the mech impaired. Just because my tools have no grease on them dosen't mean they are used.:p

Alpine003 · « **Reply #3 on:** November 13, 2006, 12:06:59 PM »

Quote from: D. Clay;13571

Mine was like this and was just coated gasket paper - no sticky on it.

Mine was also like that as I realized the silicone stuff was only on the upper pan gasket.

Took off the lower oil pan yesterday and didn't like what I saw. The oil pickup bolts were fine and still tight but there was other debris in the oil pan that partially blocked oil from being sucked up. Pics to follow later...

Time to do a compression test...

rfritz · « **Reply #4 on:** November 13, 2006, 01:00:55 PM »

Quote from: D. Clay;13571

Mine was like this and was just coated gasket paper - no sticky on it.

I bought both from the dealership and they both are just paper, no sticky...