Author Topic: WTB: e30 cluster, exhaust, diff etc. (Read 3185 times)

for3ver · « **on:** September 13, 2011, 02:55:01 PM »

I am looking for a e30 m42 gauge cluster, 4.10 or 3.73 diff, stock exhaust, shifter linkage and the body side connector that mates with the engine harness. Let me know what you got.

DesktopDave · « **Reply #1 on:** September 13, 2011, 03:46:28 PM »

You can use any cluster with the M42, if you have the four-cylinder coding chip. I think they're still available from BMW...

I'm pretty sure I have one working M20B25 gauge cluster (with 6500rpm redline tach) if you're interested. I have a bunch of eta clusters too, but they won't work for you.

I might have a C101 body side plug too, let me check & I'll get back to you tomorrow.

Matt-B · « **Reply #2 on:** September 13, 2011, 04:39:14 PM »

where r u located?

for3ver · « **Reply #3 on:** September 13, 2011, 10:44:13 PM »

I am located in Marblehead MA. Ya I have a eta so I figured it would be easier just to buy a new cluster than replace the tack.