Author Topic: z3 m shifter on 318is (Read 3142 times)

stillmatick · « **on:** January 23, 2011, 05:11:46 AM »

For the people with z3 m shifter did you encounter any problem when installing? Worth getting the z3 m shifter?

chapellej · « **Reply #1 on:** January 24, 2011, 04:59:30 PM »

i love it, at first it felt like it was sticking but i put naextra washer on it to clear and has been good ever since. i would do it it took me 20 minutes to install.

stillmatick · « **Reply #2 on:** January 24, 2011, 05:53:46 PM »

I might go with z3 1.9 but not sure will it plug and play without any modification.

chapellej · « **Reply #3 on:** January 24, 2011, 08:46:29 PM »

it is pretty well plug and play. you may need to modify the shifter a small amount but for the most part is straight forward. i would change out all the bushings while your at it.

tom d · « **Reply #4 on:** January 25, 2011, 01:19:12 AM »

i used a E21 shifter. very short and smooth, not like the Z3 shifter that was in the car.