Author Topic: clunk when turning 90 degrees, slow speed (Read 2732 times)

gravyface · « **on:** November 26, 2009, 08:28:39 PM »

Just like the title says, but so far, only on the left side. Strut mounts? Tie rod ends?

carguy101 · « **Reply #1 on:** November 29, 2009, 12:26:51 AM »

I had a friend who had a similar problem and he said that the control arm bushings were the culprit, time to upgrade to M3 offsets lol

DesktopDave · « **Reply #2 on:** November 29, 2009, 09:38:50 AM »

If it's not the CABs or roll bar bushings, I'll bet an inner tie rod balljoint.

max123 · « **Reply #3 on:** March 10, 2010, 02:22:44 PM »

I had a similar problem and have been chasing it for months - provided everything else is new and there are no obvious deficiencies I would suggest lubricating your sway bar bushings. You actually have to take the sway bar mounts off, open the bushing and spray some grease in it.