Messages

1

General Topics / Metallic Buzzing from Driver Kick Panel Area at ~3600RPM

« on: July 27, 2011, 03:37:33 AM »

I have the same problem. Between 3000 rpm and 3800 rpm i hear a buzzing noise. Sounds like a piece of meat in a pan full of hot oil sometimes.

Im sure it is not the headlight switch because it only appears when the engine is warm. If the car is cold, i can't hear anything.

2

Engine + Driveline / Mustang Injectors in an M42 engine

« on: June 10, 2011, 03:01:34 PM »

Hey there....

the Bosch 0280150953 won't work if they come from a car before 1996.
They need 58.02psi to reach the 250cc.
My Injectors come from a car before 1996 so i have a huge loss of power. My car only runs like 190 Kph now. I will change back to stock injectors till i find some Mustang's in Germany.

Greetings
Alex

3

Engine + Driveline / Mustang Injectors in an M42 engine

« on: June 03, 2011, 09:41:49 AM »

Hey i just want to say that my car runs fine with the injectors from the VR6. I think the throttle response is much faster and it runs better at idle.

Alex

4

Engine + Driveline / Mustang Injectors in an M42 engine

« on: June 01, 2011, 03:44:53 PM »

They look like the ones in bbarnumboy post above. The chrome style ones. Don't know if it is EV6. But i think they would fit.
I'll try it tomorrow. Hopefully my car will run again on saturday or sunday -.-

5

Engine + Driveline / Mustang Injectors in an M42 engine

« on: June 01, 2011, 11:55:22 AM »

Bump! Please help. Want to delete the mess under the intake this weekend and change the injectors if they fit.

Alex

6

Engine + Driveline / Mustang Injectors in an M42 engine

« on: May 31, 2011, 01:29:46 PM »

Does anyone know if i can use these injectors?

Bosch 0280150953

They come from a VW Golf 3 VR6 2.9
Some put them in the Golf 2 GTI 1.8 8V Model.

I searched the web and found different informations.

From 196cc/min to 250cc/min @ 43.5 psi
15.9ohm
EV6 Body

Alex

7

For Sale / BMW E30 cold air intakes 4cyl and 6cyl

« on: May 30, 2011, 06:14:22 AM »

Can anyone tell me what the german TÜV think about this CAI?
I would like to put one in my 318is but i don't know if it is legal here.

Also do you use the adapter or do you have a MAF conversionand is there any affordable MAF conversion now?

Alex