1
For Sale / M42 Engine Parts
« on: June 01, 2011, 01:24:23 PM »
bump
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
How-To's / DIY Fuel Pump Replacement
« on: May 31, 2011, 03:42:48 PM »
Great write up. Thanks.
Anyone have anything definitive on TRE vs Walbro?
Anyone have anything definitive on TRE vs Walbro?
3
For Sale / M42 Engine Parts
« on: March 18, 2011, 01:12:27 PM »
Upper and Lower Timing Case Covers - 15 each
Throttle Body Heaters - Dunno if anyone actually keeps these so 2 bucks for the one without a lower part and 4 for the full one
Crank Pulley - 10
Harmonic Balancer - 10
ICV - 10
Thermostat Housing - 7
Valve Cover - 25
Coil Wiring - 15
Tranny Plate thing (Sorry I forget the name) - 5
Okay so now comes the tricky part... I Have a whole head assembly from the engine that blew. The cams are in good shape and none of the valves appear to be bent. Sorry I cant describe the condition of this thing very well, but I can take a lot of pictures, so just ask :rofl: The piston on cylinder 2 went out, so the head got a small nick as you can see here in the upper right corner:
Overall pics
Cams
The head can either be sold complete with cams and everything or parted out.
One last thing not pictured sorry
Cam and Crank Timing sensors - 10 each
Prices are flexible... and if there's anything I didnt list that you might need form an engine just ask... I might have it.
Throttle Body Heaters - Dunno if anyone actually keeps these so 2 bucks for the one without a lower part and 4 for the full one
Crank Pulley - 10
Harmonic Balancer - 10
ICV - 10
Thermostat Housing - 7
Valve Cover - 25
Coil Wiring - 15
Tranny Plate thing (Sorry I forget the name) - 5
Okay so now comes the tricky part... I Have a whole head assembly from the engine that blew. The cams are in good shape and none of the valves appear to be bent. Sorry I cant describe the condition of this thing very well, but I can take a lot of pictures, so just ask :rofl: The piston on cylinder 2 went out, so the head got a small nick as you can see here in the upper right corner:
Overall pics
Cams
The head can either be sold complete with cams and everything or parted out.
One last thing not pictured sorry
Cam and Crank Timing sensors - 10 each
Prices are flexible... and if there's anything I didnt list that you might need form an engine just ask... I might have it.
4
For Sale / M42 Engine Parts
« on: March 18, 2011, 04:48:01 AM »
Hey guys, I have some parts left over from a blown engine out of a 91 318is. Im kind of a noob when it comes to m42s so try and work with me as best as possible. Prices are going to be a rough estimate based on what other people sell for... if Im way off base just let me know. Also everything is OBO 
Parts are located in the Bay Area, California
Oil Filter Housing - Make me an offer
Headers - Best offer on this one too
Lower Intake with Injectors and Fuel Rail sold
Throttle Body -sold
Upper Intake Manifold sold
AC Compressor - 30 The outside of the pulley is dinged up as you see in the pic... shouldnt effect it though :dunno:
DSC_0923.jpg by Drewdown49, on Flickr
DSC_0924.jpg by Drewdown49, on Flickr
Power Steering Pump - 25
DSC_0927.jpg by Drewdown49, on Flickr
Alternator -sold
Throttle Body Heaters - Dunno if anyone actually keeps these so 2 bucks for the one without a lower part and 4 for the full one
Crank Pulley - 10
Harmonic Balancer - 10
ICV - Sold
Thermostat Housing - 7
Valve Cover - Sold
Coil Wiring - 15
Tranny Plate thing (Sorry I forget the name) - 5
Cam and Crank Timing sensors - 10 each
I still have basically the whole bottom end. The block and the crank are gone but I might be able to salvage other parts.
Parts are located in the Bay Area, California
Oil Filter Housing - Make me an offer
Headers - Best offer on this one too
Lower Intake with Injectors and Fuel Rail sold
Throttle Body -sold
Upper Intake Manifold sold
AC Compressor - 30 The outside of the pulley is dinged up as you see in the pic... shouldnt effect it though :dunno:
DSC_0923.jpg by Drewdown49, on Flickr
DSC_0924.jpg by Drewdown49, on Flickr
Power Steering Pump - 25
DSC_0927.jpg by Drewdown49, on Flickr
Alternator -sold
Throttle Body Heaters - Dunno if anyone actually keeps these so 2 bucks for the one without a lower part and 4 for the full one
Crank Pulley - 10
Harmonic Balancer - 10
ICV - Sold
Thermostat Housing - 7
Valve Cover - Sold
Coil Wiring - 15
Tranny Plate thing (Sorry I forget the name) - 5
Cam and Crank Timing sensors - 10 each
I still have basically the whole bottom end. The block and the crank are gone but I might be able to salvage other parts.
5
Electrical / Battery Wont Charge
« on: December 12, 2010, 03:29:09 AM »
Hey guys I need a little advice trying to figure out why my battery wont charge. The battery can be charged by a tender and will hold the charge, but the alternator doesnt seem like can charge the battery. The weird thing is the voltage reads fine when running. I get 13.4 when at idle and 13.5 when revved. Any thoughts?
6
Engine + Driveline / Need Help Identifying Bolt in Timing Case
« on: November 18, 2010, 08:19:05 PM »
oh ok. I thought you knew from the diagram... Thanks
7
Engine + Driveline / Need Help Identifying Bolt in Timing Case
« on: November 18, 2010, 05:06:53 PM »
awesome. Thanks!
Can I ask how you can tell though? lol
Can I ask how you can tell though? lol
8
Engine + Driveline / Need Help Identifying Bolt in Timing Case
« on: November 18, 2010, 03:17:45 PM »
Like the title says I need some help figuring out which bolt goes in this hole
Ive scoured RealOEM but havent been able to find it. Anyone have a part number or a dimension for the bolt? Thanks
Ive scoured RealOEM but havent been able to find it. Anyone have a part number or a dimension for the bolt? Thanks
Pages: [1]