Messages

1

Engine management / e30 intake project

« on: March 23, 2011, 01:17:37 AM »

hey how r u guys doing. i am doing a project i am going to swap the e30 manifold into my 93 m42. right now i am doing a head gasket so my question is the 93 m42 has two vacuum lines, one in the throttle body and one in the manifold itself the e30 manifold has only one can i drill a hole in the e30 manifold around the same area were it is in the e36 and put a connection for the second vacuum that way it could have the same function any suggestion are welcome thanks guys.

2

Electrical / 318is door lock

« on: January 28, 2011, 10:39:48 AM »

well yeah i dont have alarm maybe i should just get one that when i start driving it locks by its self

3

Electrical / 318is door lock

« on: January 27, 2011, 10:38:50 AM »

yup if u press the drivers door button it losck evrey thing butt its in an acward location to turn around and get it so i do it with my elbow i wonder if there is a diy on a button like the ealier e36 the ones that have the button to lock or unlock by the shifter

4

Electrical / hey

« on: January 26, 2011, 09:38:58 PM »

i mean that once i start driving my doors dont lock i dont know if there suposto but since like way in the back i dont like to try and reach it so i just found it easy that with my left elbow push the button then it will lock evrything  i am tierd of using that method

5

Electrical / 318is door lock

« on: January 26, 2011, 11:47:07 AM »

hey how r u guys doing i was wondering if anybody new how to lock the doors on a 93 318is without using my elbow while driving or is there a diy for a button like the earlier models i am tierd of using my elbow by the way its a two door coupe

6

Engine management / Midnight M42 Performance Chips

« on: September 14, 2010, 01:08:07 AM »

mmm i think something is wrong with the page when is it going to be up and runing and r u going to accept paypal

7

Suspension / e36 318is brakes

« on: September 02, 2010, 11:26:46 PM »

hey guys i got a question can i swap the brakes from an 96..... m3 to a 93 318is my friend owns a 97 m3 they look alot bigger there stock he bot zimmerman rotors drilled brembo covers looks superb  wat would i need and can it be done

8

Swaps, Turbos, Buildups / 93 318is exhaust

« on: May 16, 2010, 10:43:29 PM »

thanks

9

Swaps, Turbos, Buildups / 93 318is exhaust

« on: May 13, 2010, 11:15:54 PM »

wats the best magnaflow set up.    catles or highflow cat and what size pipe and does it make a differance if the muffler is in the middle or in the back

10

Interior / power vaders on a 318is

« on: April 27, 2010, 12:02:20 AM »

hey guys i got a 93 318is with manual seats and i got 99 m3 vaders powered anybody knows a write up or diy that i could use to get them working thank u

11

Swaps, Turbos, Buildups / cosmo racing cold air intake

« on: October 14, 2009, 04:58:56 PM »

The web site is cosmoracing.com

12

Swaps, Turbos, Buildups / cosmo racing cold air intake

« on: October 14, 2009, 04:45:58 PM »

Has anybody tried dis intake 103 bucks I order one alrready u guys think it was worth it talk to me people.

13

Engine + Driveline / Thermostat and Coolant Bleeding Issues

« on: October 06, 2009, 01:12:51 AM »

Ok I ain't no pro but I had da same problem for like a month looking every were to find the solution for overheating did every thing like pump the t nothing I work in a little shop I took my car and I said just for the hell of it I am going to do a coolant flush with a machine we got and guess what wala I think u should take ur car to like a jiffylube or something were they can do a realy good flush I did mines myself I did a pretty good job make shure they put the outlet hose to the t stat. The machine puts so much pressure that it forces the air out the system also leave ur ignition on with the heat blasted. When I was done with my car I wanted to cry of joy try it it will work but make shure u go to some ho nows how to do a good flush and with a machine. Good luck

14

How-To's / M42 mass air flow sensoe delete?

« on: September 25, 2009, 09:48:30 AM »

Well if is not restrictive ill just find a way to relocate the vaf what do u guys think could it work

15

Swaps, Turbos, Buildups / dasc supercharger

« on: September 24, 2009, 03:21:26 PM »

Hey but I seen a trubo kit in ebay and a manifold if u look u will find it plus is like 1300 for every thing much cheaper I am going to build it my self but that's if I get it I still don't know wich way to go 3000 bucks is 3000 bucks