Messages

1

Swaps, Turbos, Buildups / m44 319is turbo under £1000 need help

« on: October 08, 2009, 03:10:06 AM »

hi quick update i badly need a fum ( rrfpr ) as i only have a 1.1 at the mo and it is running so rich at idle can anyone tell me witch ones are good and how much they cost and where to get it from i cant find any over here in the uk also what ratio will i need fuel wise if i want to run 8psi of boost thanks

http://www.facebook.com/search/?q=richard+pope&init=quick#/profile.php?id=502962479&ref=search&sid=502962479.1243033273..1

have a look

2

Swaps, Turbos, Buildups / m44 319is turbo under £1000 need help

« on: September 17, 2009, 03:29:03 PM »

Ok thanks but do u no any that has used a apexi safc 2 thanks
and got the car running today idels well but is lean

3

Swaps, Turbos, Buildups / m44 319is turbo under £1000 need help

« on: September 14, 2009, 06:00:39 AM »

Ok thanks also has anyone used a apexi safc 2 piggyback ecu on a turbo m44 as I have one and think it mite be helpfull  

So far I have worked on the car this weekend and taken out the old m40 engine fitted a low milage m44 i have put a 200sx t25 on done all the oil feeds and it is all wired in all I have left to do is plumb in an intercooler and get some gaskets for the exharst as I am runing an e30 m3 after Market exharst bits are hard to get I will add pics soon

And with the 19lb injectors I have been looking into it and have been told they are 19lb at a low psi like 32 but a 318is about 52 psi I think so they should run more like 22lb I think can anyone help or am I being really thick
thanks

4

Swaps, Turbos, Buildups / m44 319is turbo under £1000 need help

« on: September 13, 2009, 04:27:41 PM »

hi everyone great site loads of info but i need a bit of help

1 y dose everyone one run the afm after the turbo and not befor how can a standerd afm read boost ?

2 rate rasing fuel pressure regulator is that like a normal Adjustable Fuel Pressure Regulator or is it something else

3 i have a set of 19lb ford mustang injectors which i used on my e30 325 m20 do u think they would work on a 319is turbo i wil be runing a t25 from a 200sx and only want to run about 7psi to start with


thanks