Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Sean_318is

Pages: [1] 2 3 ... 10
1
Member Profiles / Sean_318is
« on: July 08, 2010, 09:09:42 AM »
Yeah I'll see what I can do :) The Lock barrel is in the handle part rather than the door.

2
Member Profiles / Sean_318is
« on: July 07, 2010, 11:00:22 AM »
This month, the iS passed the MOT :) No problems, advised on the strut brace, rear indicator bulb, slight play in steering rack, perishing front brake hoses. I've had the hoses replaced. While the wheels were off I noticed the right hand front drop link bush is frayed... maybe next month fore that!

I finally bit the bullet and bought a brand new BMW door handle, £70 but it was the correct part, has some warranty and 2 keys. Sorted!

I chucked the carpet mats in the washing machine and they came up really nice, thy're actually a light beige colour! Also removed the seats and gave the leather a scrub with warm soapy water so they look good too.

Next I need to replace the dented boot lid and get some tyres for my 16" wheels.

3
Engine + Driveline / Cam Cover
« on: July 03, 2010, 04:26:22 AM »
This was my local motor factor our company deal with all the time, I gave them the registration.

4
Engine + Driveline / Cam Cover
« on: July 02, 2010, 04:52:29 AM »
GahH! They've sent me an M10 cam cover gasket. Dammit!

5
Engine + Driveline / Cam Cover
« on: July 01, 2010, 02:21:13 AM »
It's actually for my 320i because it leaks oil all over the ex. manifold. Schhhhmokey! Yeah I've ordered a gasket set, for about £6. Cheap!

NO_CARRRIER, its easy on the M42, takes about an hour max. Some of the bolts at the back of the head are hard to reach.

6
Engine + Driveline / Cam Cover
« on: June 30, 2010, 05:37:42 AM »
Hi, Can I use sealant on the cam cover to stop it leaking, would this work?

Thanks

7
Engine + Driveline / can't get my car past 4000rpms...
« on: June 28, 2010, 05:00:22 AM »
Timing sensors?

8
Engine + Driveline / MAF sensors
« on: June 24, 2010, 06:00:04 AM »
GM UK/Europe (Vauxhall and Opel) cars used the same Bosch AFM as the M42 in early 90's cars like the Cavalier etc, I know cos we have a box full of faulty/test units in the workshop!

9
Member Profiles / Sean_318is
« on: June 10, 2010, 04:02:23 AM »
I think its going to be a trailing arm bush. Power, haha! lol :)

I'll find out when it gets tested next month.

10
Member Profiles / Sean_318is
« on: June 07, 2010, 03:47:09 AM »
Ok news on the 320I front:



Looking good hehe

Just a couple of small issues to clear up then it should be ready

11
Off-topic discussion / My New Project (E30M Content)
« on: June 07, 2010, 02:48:33 AM »
HOLY CRAP!  Good luck with that! :)

12
Site and club discussion / m42& m44 heads
« on: May 28, 2010, 05:24:20 AM »
What is the advantage of this swap? Lighter drive train? More power?

Just curious.

13
WTB/WTT / Wanted: E36 coupe D/S exterior handle with key
« on: May 27, 2010, 03:29:38 AM »
Thanks for your time :) I'll let you know how it turns out.

14
WTB/WTT / Wanted: E36 coupe D/S exterior handle with key
« on: May 26, 2010, 03:49:19 AM »
Hi, they should work. I need the key so I can swap the locks over or else I'd have two doors with two different locks and no way of getting in the car if I lose the remote! :S

Now, how much is postage to the UK hehe. I should just go to my scrap yard really.

15
WTB/WTT / Wanted: E36 coupe D/S exterior handle with key
« on: May 25, 2010, 05:00:03 AM »
Hi guys,

I'm after an E36 coupe D/S exterior handle with key so I can repair my door.

Any offer welcome, thanks.

Sean

Pages: [1] 2 3 ... 10