Messages

1

For Sale / FS: m42/44 (S42 replica) parts and e30 318is (from Holland) itb`s, alpha-n etc

« on: June 28, 2012, 12:39:51 PM »

cams were used about 500/1000 km`s so they are `as new`

2

For Sale / FS: m42/44 (S42 replica) parts and e30 318is (from Holland) itb`s, alpha-n etc

« on: June 27, 2012, 05:31:05 PM »

catcams costed me 800 euro, valvetrain pieces 400.

I hadn`t had the engine complete with these parts, so also no dyno.

I only had the itb`s installed just for fun and noise

3

For Sale / FS: m42/44 (S42 replica) parts and e30 318is (from Holland) itb`s, alpha-n etc

« on: June 25, 2012, 04:20:28 PM »

http://www.dbilas-shop.com/product_info.php?language=en&products_id=207

This is the one I have

4

For Sale / FS: m42/44 (S42 replica) parts and e30 318is (from Holland) itb`s, alpha-n etc

« on: June 24, 2012, 05:05:52 PM »

check pb

selling of lose parts is possible yes

5

For Sale / FS: m42/44 (S42 replica) parts and e30 318is (from Holland) itb`s, alpha-n etc

« on: June 24, 2012, 12:45:09 PM »

For Sale:

Lot of m42 parts wich I gathered in a couple of years:

292 cam`s inlet/outlet catcams
mechanical valvetrain parts to replace hydrolic ones
dbilas Individual Throttle bodies
2.1 krank
Alpha-n module
spare m42 head and pistons/rods


These parts are maybe also interresting enough to ship wordwide, apart from these parts I also have the car for sale:

I already have done a lot of work on it, has standerd steel rims, currently the itb`s are mounted on the engine.

4.10 lsd
gruppe-n springs (120Nm front, 180Nm back)
stainless exhaust
stainless breakhoses..etc

Please mail for more info.

notice that I live in the Netherlands







http://youtu.be/th1A-VhOlNY
http://youtu.be/RCix8Ue1ubY

apart from the car, the parts costed around 5000 euro`s

therefore, the complete buying of everything I have laying around on m42 incl. the car would cost about 5k

6

Swaps, Turbos, Buildups / Dbilas ITB's installed

« on: September 01, 2010, 04:08:02 PM »

also my opinion... from 5k up it feels alive... underneath it dousn`t feel at all:p

plans with engine:

work on the cil. head.. (flowen)
pressiure valve system gone... mech valve system in...(higher revs!)
about 290 cams..

bore same, but 1.9 krank...

than after fitting itb`s and alpha-n it must run about 8300 revs.. and app. 200/210 hp

7

Swaps, Turbos, Buildups / Dbilas ITB's installed

« on: September 01, 2010, 04:03:37 PM »

btw.. it runs on stock ecu... this one runs on a cheap ebay-chip.. but also runs..

idle isn`t what you want it to be.. but with the itb`s you kinda set the idle on the itb`s (by setting them a little bit `open`)

real profit in the power departement isn`t realy the case..
manely because it hasen`t been chipped after the build-up..

but the whole engine is going apart.. so chipping it now is like taking a whore fishing:p
might be fun, but not what you wanted to...

8

Swaps, Turbos, Buildups / Dbilas ITB's installed

« on: September 01, 2010, 03:58:19 PM »

this is my car and itb`s

we just wanted to try-fit it before taken the complete engine apart..

installing is not the most difficul thing to do, you only have to understand wich is doing what...

as a matter of fact, this complete intake is less troublesome to take apart than original..

Alpha-N is laying ready for build-in.. but that will be the last phase..
first the engine is going apart..
this probably will also take a year or so.. right now I am very busy taking my engine from my 325i conv apart... also going on itb`s:D

In this e30 I do not have abs... indeed the flowmaster will sit on top of the abs-unit, wich is not very easy to make a nice fit....

but with the loss of the airflowmeter, you won`t be needing it... just some panty`s over the itb`s :p

9

Member Profiles / Boosted E30

« on: January 25, 2009, 12:58:45 PM »

i will post videos once its not -24 degs C out side.

ghehehe... indeed... has been better outside:D

10

Member Profiles / Boosted E30

« on: January 25, 2009, 04:24:38 AM »

it will increase some torque.. but with the turbo, torque is plenty around, I guess:D

Do you have any more info on the set-up? how much bar? hp? torque?
moviefiles?

11

Member Profiles / Flexz from holland says hello

« on: January 24, 2009, 12:48:00 PM »

http://nl.youtube.com/watch?v=P540V4KqAvs&feature=channel_page#

not the best quality, but to give you an idea....

12

Photoshop, Media, & Artwork / anyone pictures?

« on: January 18, 2009, 03:27:09 PM »

does anyone have any pictures of a silver e30 (m3) with black BBS RC 090 onderneath it?

I`d like to know how nice they are in the black color onderneath my silver e30:cool:

13

General Topics / airbox m42 sound anyone??

« on: January 17, 2009, 02:29:21 PM »

would love to see a video, and off course pictures of all your work are also very welcome!

but in the meantime, I still don`t have a videofragment from an m42 on airbox:p

14

General Topics / airbox m42 sound anyone??

« on: January 16, 2009, 06:11:54 PM »

lol i tryed makin a vid but you couldn't hear it very well.

doe it again!!!

so you have an real airbox on your m42 with itb`s?

very interested in the sound of it..

thanks for the effort, by the way..

15

General Topics / airbox m42 sound anyone??

« on: January 16, 2009, 02:35:07 PM »

anyone??....