Messages

1

Swaps, Turbos, Buildups / best size, type of turbo for the M42

« on: June 05, 2009, 06:51:00 AM »

I have an E30 with m42 engine too and I will turbocharge it soon so I will tell you what I will do and I hope to help. first I inform you that I buld it for drift so I need a small turbo boosting at low rpm and can provide us much hp us can be possible with just reprogramed ecu. Thats why I choose an IHI rhb5 turbo from Maserati Ghibli Cup! small, cheap and japanese!!! this turbo can boost from low 2000rpm and can provide 200+ hp EASYLY and I knew it because I have used this turbo at past in a Daihatsu Charade GTti getting 224hp from just 1000cc!!! this is what I will do and this is my opinion

2

Swaps, Turbos, Buildups / best size, type of turbo for the M42

« on: June 05, 2009, 05:17:38 AM »

my friend naika your question dipends at your needs. drift or drag?? how much hp??

3

Swaps, Turbos, Buildups / E30guydownunder's Track car build.

« on: June 05, 2009, 04:52:54 AM »

congratulations my friend!!!! very good work!!!

4

Suspension / E30 Coilover kit

« on: September 29, 2008, 01:00:33 AM »

I'm thinking to use koni (yellow) adjustable shocks + coilover kit. I think I will buy this GC coilover kit us you say it is so good. it cost 400$ + shipping, isn't it? what do you think about Eibach Anti Roll Bar Kit??

5

Engine management / Stock Ecu For Turbo Use

« on: September 26, 2008, 02:31:43 AM »

of course standalone systems will give you more possibilities to tune up your car, but in the most cases piggy back devices will do the job.

yes, this is the reason why I'm thinking now a standalone ecu...

6

Suspension / E30 Coilover kit

« on: September 26, 2008, 01:06:12 AM »

GC is GC/Eibach Coilover? And I bealive that it is much better than the other but it has the duble price:( ...do you knew any site to find it cheap?? is this cosmo coilover good? I want very hard springs :rolleyes:

7

Engine management / Stock Ecu For Turbo Use

« on: September 26, 2008, 12:44:44 AM »

I'd recommend a stand alone ECU 24/7, if you go with Megasquirt it doesn't have to be that expensive.

Can someone tell me some more things about this Megasquirt ecu? is it so good?
Megasquirt or Perfectpower is better?

8

Suspension / E30 Coilover kit

« on: September 25, 2008, 07:14:31 AM »

I prepair my car for drift so I need a good suspention but cheap too... I found this coilover kit http://mimousa.com/home.asp?dir=products&prod=2262  It is a product of mimousa. I'm thinking to buy it and 4 hard shocks making my own cheap coilover suspension. what do you think, can it work for the use I want?? please tell me your oppinion...

9

Engine management / Stock Ecu For Turbo Use

« on: September 24, 2008, 07:42:29 AM »

Are the RC 750 cc injectors high impedance

Do you mean if RC injectors have hight resistance?? if you mean this RC prodact injectors with low resistance 2.5 / 3 OHMS  and same with hight resistance Approx. 12 - 16 OHMS. This is a part of the project that I hadn't think... thanks;)

10

Engine management / Stock Ecu For Turbo Use

« on: September 23, 2008, 11:38:44 AM »

I want 300-380hp so car will work over 14psi

11

Engine management / Stock Ecu For Turbo Use

« on: September 23, 2008, 09:10:07 AM »

I have the other one writting DME

12

Engine management / Stock Ecu For Turbo Use

« on: September 21, 2008, 05:03:20 AM »

Does it make any difference? It's Bosch Motronic systems DME box

I can check out later to day, have one extra box somewhere. Most likely there is written Motronic if i can remember correctly, but i suppose you need the Bosch part number ?

hey Mike,
Chris is from Creece, so give him a chance, after all most likely he writes better Greek than me and you

yes I knew, many things I write may have not the correct form... Ose30 is right . I didn't knew that DME was Bosch Motronic systems. I thought that they had difference..
Soon I will present you my project

13

Engine management / Stock Ecu For Turbo Use

« on: September 16, 2008, 07:50:55 AM »

ok, if you want any one on this board to take the time to answer your question, at least take the time to make it somewhat understandable.
Seriously.

Motronic or DME??

14

Engine management / Stock Ecu For Turbo Use

« on: September 10, 2008, 01:34:29 PM »

guys, what is writting on stock ecu on it? product make?

15

General Topics / Which Turbo?

« on: September 08, 2008, 05:03:37 PM »

I sagest you Garrett GT2560R. it is a great ball bearing turbo