Messages

1

Engine + Driveline / Replacing Crank Pulley for my M42 engine

« on: May 14, 2008, 08:34:54 AM »

Its a 93 e36. Thus the engine its a obd1 M42B18.

Do you mean that I could use the crank pulley from the M44 engine? Cause M44s are obd2 and only post E36s have them.

im about 85% sure that you can.

2

Engine + Driveline / Replacing Crank Pulley for my M42 engine

« on: May 12, 2008, 10:54:36 PM »

is this in an e30 or e36?  im guessing a 92-95 318.  you need the pulley from an obd2 car i believe and it should bolt right up.  i just swapped my crank pulley for an obd1 e36 cp to fit my s/c.

3

Vendors / GB / EAT chip group buy for E30 M42!

« on: May 07, 2008, 05:34:46 PM »

sold

4

Engine management / Adjustable FPR

« on: April 08, 2008, 05:37:13 PM »

DASC provides one with their kit

5

Vendors / GB / EAT chip group buy for E30 M42!

« on: April 02, 2008, 09:18:29 PM »

i got the chip and installed it today. im pretty happy with it, revving to 7k is much nicer though i expected to feel more of a power difference. i did manage to keep up with my friends integra rs until about 4th gear, then he pwnd me :-(.  thanks for everything mark and i may be contacting you in the future when i need a re-tune after i go FI!

6

Vendors / GB / EAT chip group buy for E30 M42!

« on: March 25, 2008, 09:40:12 PM »

hey mark,  when should i be expecting my chip?

7

Vendors / GB / EAT chip group buy for E30 M42!

« on: March 18, 2008, 01:35:09 PM »

you have my payment!  thanks alot mark

8

Vendors / GB / EAT chip group buy for E30 M42!

« on: March 17, 2008, 09:58:53 PM »

sweet, we have enough.  what is next?  Can someone get a hold of mark?

Mark if you read this what is the HUGE difference between the 91 and the 93 octane chip.  Is there a very big increase with the 93 over the 91.  I can get 93 without an issue but in case I am on a trip and can only find 91 i am questioning it.  If there is a not a huge difference then it might be better to stick with the 91.  But if it is worth it then 93 it is.

I only put 93 in now anyway.

Also one of these will be used with the m42 in my 2002.  That m42 does not run AC or power steering and it does not have a cat.  Will this chip still be good for that engine?

Jake

i guess we just wait for mark to take a look at this thread.  

and to answer your other question, i think i remember him saying that the 93 is a pretty noticable difference from the 91.  what im going to do when i go on trips is just bring or install my stock chip.

9

Swaps, Turbos, Buildups / Track Debut - Turbo M42 E30

« on: March 13, 2008, 10:03:12 PM »

Awesome . . . I go to the NASA run-offs every year @ mid-ohio. . . I hope to see you there next fall

what kind of event is this?  im about a 3 hour drive from mid ohio

10

Vendors / GB / EAT chip group buy for E30 M42!

« on: March 13, 2008, 03:01:48 PM »

your the man!  ok mark,  tell us what you would like us to do next?.?

11

Vendors / GB / EAT chip group buy for E30 M42!

« on: March 12, 2008, 10:35:54 PM »

great!  we only need one more!

12

Vendors / GB / So who will commit to 318is/M42 skidplates?

« on: March 07, 2008, 04:25:43 PM »

this pic is hilarious!  with the fat cat and the coconut.

13

Vendors / GB / EAT chip group buy for E30 M42!

« on: March 03, 2008, 11:35:55 AM »

come on guys. we only need 4 more!


1.Adam c.-93octane
2.eric16v-91octane
3.tauremini-91octane
4.jakeb-93octane
5.jakeb-93octane
6.Koko/wadhip(Indonesia) - 93 octane
7.
8.
9.
10.

14

Vendors / GB / EAT chip group buy for E30 M42!

« on: February 25, 2008, 09:29:24 PM »

we will finish the list, then as we pay mark can check us off the list.  unless mark wants us to do it another way?

btw, here is the updated list:
 

1.Adam c.-93octane
2.eric16v-91octane
3.tauremini-91octane
4.jakeb-93octane
5.jakeb-93octane
6.
7.
8.
9.
10.

im guessing we only need 5 more.

15

Vendors / GB / EAT chip group buy for E30 M42!

« on: February 24, 2008, 09:01:25 PM »

it might be easier if those that want 2 chips put there name on the list twice, once for each chip