M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Engine + Driveline => Topic started by: -turf on August 26, 2009, 04:36:36 PM
-
hey, i need a new fuel pump.. sound like mine is about to go. would a pump out of an e30 325 work ok with it?
i can get this before weekend if it will work..
thanks!
-
Call the parts store and ask them what the pressure is and the GPH or LPH numbers are and compare them. and then post them here so we all know
-
you can take the main parts from the 325 pump and transfer them over to the "carriage" from the m42 pump, solder in the new wires, but it will idle/run very rough. the m42 fuel pump has an internal dampner in it, which only comes in the 4 cyl engines. your only real choice is another m42 pump.
-
I've put in a Walbro fuel pump in mine... Previously used the fuel pump from Mitsubishi too.. Just need to secure it to the carrier and solder the 2 wires. DIY job.