M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => General Topics => Topic started by: ///m42 sport on May 30, 2009, 10:51:49 AM

Title: resurface dual mass flywheel?
Post by: ///m42 sport on May 30, 2009, 10:51:49 AM

Any of you guys do this?  anything special to it?  I plan on replacing my clutch soon.  thanks.

Title: resurface dual mass flywheel?
Post by: 1991 E30 M42 on May 31, 2009, 12:20:21 AM

The only way to resurface the dual mass flywheel is to take it apart, otherwise your best bet is to clean it up with some sandpaper or get you an M20 flywheel.

Title: resurface dual mass flywheel?
Post by: beemer1 on June 01, 2009, 10:01:20 PM

I cleaned the flywheel but never resurfaced it using sand paper...I think I made a mistake because now I have very very slight vibration from the clutch, especially when its cold.

Use sand paper ;)

Steve