M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Electrical => Topic started by: 3seriesNut on April 14, 2009, 08:49:54 PM
-
i just noticed that when i turn my high beams on the drives side low beam goes out. what causes that and how can i fix it? also is there a way to wire the fogs so they dont go out when the highs are on?
-
you need a new headlight, the low beam on the stock sealed beam lights is a dual filament, one is for low only, and the other runs off of the high beam circuit
-
might as well change all 4 to hella's that i can actualy change the damn bulbs in then.
-
both low's went out now. what do i need and where do i get it at to convert to hella halogen type setup?
-
Mine did the same thing but I cannot remember what I did to fix it. I can now run the fogs with the high beams on.
I seem to recall a diy link to somewhere that required a wire jump in the fuse box. Sorry for the lack of information. I will try and research it for you.
-
ive searched and came up with nothing of use. might be better off to replace all 4 lights.
-
This is great! Now I want to see your ways for us readers to become more involved! Expect an email later today.
what a douchebag