M42club.com - Home of the BMW E30/E36 318i/iS
FAQ / REFERENCE => How-To's => Topic started by: dave45056 on July 02, 2006, 06:21:25 PM
-
OK, so I have access to a machine shop and I'm an engineer (no not a Chem e, but a mechaical). Anyway I made some drawings to make the tools to do a HG repaair or head remove/replace. I found another guy in the same boat (I mean, access to machine shop) so I posted the drawings.
Thought some of you in here might like to use them to save some $$.
Here is the link:
http://www.318ti.org/forum/showthread.php?t=11334
Now this is a real diy, huh?