M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Suspension => Topic started by: KyleTaylor on September 10, 2008, 09:46:04 PM
-
The IE3 and H&R Race are the stiffest springs out there that are readily available and are stock replacement. Have any of you used them and what is your impression? I have used Eibach Pro and found them to be way too soft.
I also want a pretty radical drop, however...
Want it low and stiff. No argument about functionality its just how I want it.
-
H&R race no question.
IE3s make you sit funny.
-
So you prefer H&R Race?
-
Its what I have on my car, so yes.
-
some pictures for referencehttp://s233.photobucket.com/albums/ee215/Stan141/91%20318is%20ride%20heights/ (http://s233.photobucket.com/albums/ee215/Stan141/91%20318is%20ride%20heights/)
-
(http://i233.photobucket.com/albums/ee215/Stan141/91%20318is%20ride%20heights/DSCN1151.jpg)
that looks horrible.
-
I like the H&R Race over the IE3s.
But the IEs are cheap, progressive(better ride) and perform well(had them on my 325). With Bekkers front drop hats I think the IE3s look great.
Coils > Any springs
http://www.ground-control-store.com/products/description.php/II=121/CA=98
About the same price too.
Hunter
-
I like the H&R Race over the IE3s.
But the IEs are cheap, progressive(better ride) and perform well(had them on my 325). With Bekkers front drop hats I think the IE3s look great.
Coils > Any springs
http://www.ground-control-store.com/products/description.php/II=121/CA=98
About the same price too.
Hunter
I should hold out for that... It's only the front, though, right?
-
H&R race are progressive springs as well.
IE3's and H&R races also have the same spring rate.
IE3's just make you sit funny.
-
I should hold out for that... It's only the front, though, right?
that is for front and rear. its also the setup i have and i love it. definately worth the extra effort in my opinion. i wish i woulda done it first instead of riding around on just springs & shocks. plus you can set the ride height however you want.
-
that is for front and rear. its also the setup i have and i love it. definately worth the extra effort in my opinion. i wish i woulda done it first instead of riding around on just springs & shocks. plus you can set the ride height however you want.
Thanks for the clarification. That is what I am going to get... what rates did you use? I am thinking 350 in front and 450 in rear...
-
(http://i233.photobucket.com/albums/ee215/Stan141/91%20318is%20ride%20heights/DSCN1151.jpg)
that looks horrible.
I know, I hated it. I went to TC Kline coilovers with Koni SA's and still haven't got a picture of the new stance yet. The spring rates I went with are 400f 500r.
-
Anyone have good side pictures of M42 on H&R race?
-
(http://a144.ac-images.myspacecdn.com/images01/32/l_a847d730fdecb308f44662250ee91857.jpg)
-
(http://a144.ac-images.myspacecdn.com/images01/32/l_a847d730fdecb308f44662250ee91857.jpg)
looks nice, what size wheel/tire?
-
17x7 with 215/40/17