M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Swaps, Turbos, Buildups => Topic started by: vatos_p on July 31, 2008, 03:04:31 AM

Title: hydraulic handbrake ( e-brake )
Post by: vatos_p on July 31, 2008, 03:04:31 AM

i am currently searching for a hydraulic handbrake to install to my E30 , but i have some questions for anyone who might know...

1. ok you install the unit into the car , but where does the lines go ?

a. directly to the rear wheels ?
b. in front to the abs box ?
c. in front to the brake cylinder ?

do i need a special valve that will not let the oil from the handbrake go to the front brake when you pull it ?

do i need to disconect the rear wheels from the brakes ?

please if anyone knows tell me !!!

thank you...

Title: hydraulic handbrake ( e-brake )
Post by: romkasponka on July 31, 2008, 06:03:46 AM

From pressure reducer to E-brake and from E-brake to the rear wheels.

Title: hydraulic handbrake ( e-brake )
Post by: christophbmw on August 23, 2008, 12:55:38 PM

just hook the handle up to a valve, but then you have to hit the brakes, pull the handle, then release the brakes and prestor! your rear wheel are locked. May i ask why you want to go hydralic? do you live in a cold climate? ive had my cables freeze in tahoe here in california before, but i didnt know it got that cold in greece.

Title: hydraulic handbrake ( e-brake )
Post by: kiulu on August 23, 2008, 01:13:50 PM

We have connected the hydraulic handbrake to original rear brakeline.