M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Electrical => Topic started by: dvmotorsports on July 17, 2008, 01:04:18 AM

Title: No Crank, No Start
Post by: dvmotorsports on July 17, 2008, 01:04:18 AM

So I finished my project and all was well. Drove it about 35 miles and the rear main was leaking. So I just got done resealing the rear main and input shaft seal.

Then I fired it up, ran like butter. Shut it off and went to crank 5 minutes later.....POP! No crank, no start, no lights interior and exterior.

I am horribly unskilled at electrical. So where do I start?

BTW its a 91 4dr.

TIA

Title: No Crank, No Start
Post by: dvmotorsports on July 17, 2008, 01:21:41 AM

meh, nevermind. B+ cable broken.