M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => General Topics => Topic started by: Bunta on July 13, 2008, 07:38:35 PM
-
(http://img529.imageshack.us/img529/9104/fhfh001ac2.jpg) (http://imageshack.us)
(http://img529.imageshack.us/img529/9104/fhfh001ac2.4388e519c6.jpg) (http://g.imageshack.us/g.php?h=529&i=fhfh001ac2.jpg)
(http://img529.imageshack.us/img529/2296/fhfh003mb8.jpg) (http://imageshack.us)
(http://img529.imageshack.us/img529/2296/fhfh003mb8.b22833a663.jpg) (http://g.imageshack.us/g.php?h=529&i=fhfh003mb8.jpg)
(http://img529.imageshack.us/img529/2829/fhfh004sk4.jpg) (http://imageshack.us)
(http://img529.imageshack.us/img529/2829/fhfh004sk4.d68bc3db18.jpg) (http://g.imageshack.us/g.php?h=529&i=fhfh004sk4.jpg)
Just got it on this weekend.
11.75" Rotors behind 15" wheels.
No spacers but the calipers needed a little grinding.
Hunter
-
very nice! how long did it take you to get them in? Those are 4 piston calipers right? how much do they weigh? One last question! How much was the set?
-
that looks good!!! by the way, what wheels are those, and where do you get them?
-
They came in about 3 weeks. 4 piston wilwood superlites. They weigh a fair amount less than stock. Just the difference in the rotor weight is amazing.
I got the kit from massive because it was the only kit that fit behind et27 15x7 Kosei K1s. I didnt want spacers or wheels any bigger than a 15".
the rotors are 11.75"
they ended up costing $1158
probably overkill but...
Hunter
-
Bad azz lift!
-
Bad azz lift!
It does its job. You wouldnt want to do a clutch or much exhaust work on it but it works fine eveything else. I couldnt get a 2 post in the little garage or the car would be in my room.
(http://img172.imageshack.us/img172/1289/hhffh011qa4.jpg) (http://imageshack.us)
(http://img172.imageshack.us/img172/1289/hhffh011qa4.35c0824f0a.jpg) (http://g.imageshack.us/g.php?h=172&i=hhffh011qa4.jpg)
(http://img172.imageshack.us/img172/8278/hhffh005rg3.jpg) (http://imageshack.us)
(http://img172.imageshack.us/img172/8278/hhffh005rg3.e962e46183.jpg) (http://g.imageshack.us/g.php?h=172&i=hhffh005rg3.jpg)
Still waiting on my stainless lines. I think im going to get a 25mm master cylinder to frim up the pedal a bit, these brakes push alot more fluid.
Hunter
-
Those are wicked nice! I bet you can stop on a dime and turn it into 2 nickels! I am way jealous! i want to upgrade my caliper/rotors some day when i have enough power to know i need better brakes!
-
I am jealous of your garage and a garage equipped with a jack like that