M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Electrical => Topic started by: ///m42 sport on July 02, 2008, 10:10:58 PM

Title: apexcone HID install question
Post by: ///m42 sport on July 02, 2008, 10:10:58 PM

(http://i25.photobucket.com/albums/c57/m42sport/IMG_0580.jpg)  

So I was wondering if this connection between the ballast and the bulb can just be cut out.  Then just solder the wires together.  That way you can minimize the hole to cut out on the headlight cap.