M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Engine + Driveline => Topic started by: KyleTaylor on June 23, 2008, 08:57:19 PM
-
I have owned several BMW's in my short life, but this has to be almost the loudest engine I have owned.
The m10 was louder with 400k miles.
What makes the m42 engine so loud? I am talking about valve train noise.
KT
-
Timing chain instead of a belt.
-
Shouldn't have any valve train noise, but the chain can put out a 'whine'.
But if its clattering away then you most likely have some kind of issue, like low oil pressure or worn out chain components maybe.
-
Shouldn't have any valve train noise, but the chain can put out a 'whine'.
But if its clattering away then you most likely have some kind of issue, like low oil pressure or worn out chain components maybe.
It's valve noise. I want to learn more about swapping to the 94 - 95 DOHC head. And freshen one up to put it on.
-
yea, mine ticks alot...kinda pisses ya off after a while.
-
Mine's quiet as a mouse. Exhaust buzzes a bit.
-
Mine's quiet as a mouse. Exhaust buzzes a bit.
What is the mileage? I have a feeling the guides are just worn out or the lifters are getting weak. Mine has over 150k...
-
What is the mileage? I have a feeling the guides are just worn out or the lifters are getting weak. Mine has over 150k...
81k. If the guides are that worn out, I'd do a chain/guide replacement before the engine grenades.
-
81k. If the guides are that worn out, I'd do a chain/guide replacement before the engine grenades.
I am looking for a lower mileage one anyway...
-
I am looking for a lower mileage one anyway...
150k isn't really high mileage for a BMW engine. As long as nothing else is wrong with it, I think I'd just replace the worn parts.
-
150k isn't really high mileage for a BMW engine. As long as nothing else is wrong with it, I think I'd just replace the worn parts.
I realize that. My e36 325is had 158k... I figured it would be cheaper to replace the engine with a lower mileage m44 instead of replacing lifters and the tensioner and chain. That is with no labor cost.