M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Engine + Driveline => Topic started by: Boyracer on May 21, 2008, 03:32:40 AM

Title: Hartge 91 mm stroke crankshaft in german ebay now!
Post by: Boyracer on May 21, 2008, 03:32:40 AM: 500€

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&rd=1&item=150249301821

Ok, who will be the crazy fecker to get that MF?

Stock stroke is 81 mm so this is whopping 10 mm more.

With 84 mm (stock) bore = 2017 cm3
With 86 mm (S50B30) bore = 2114 cm3

I'm not too keen on storking the engine but if you want torque and do not want to rev high this might be your lucky day :D
Title: Hartge 91 mm stroke crankshaft in german ebay now!
Post by: strypt on May 21, 2008, 07:01:23 AM: Cool :D If I didn't already have a M47 crank I might have gone for that one :D
Title: Hartge 91 mm stroke crankshaft in german ebay now!
Post by: Letsplayskatch on May 21, 2008, 08:42:18 AM: OMGOMGOMG!!!1!
*clicks watch item*

I'm really terrible at German, despite studying it for 3 years... :(
Could comeone please translate the important stuff for me :) Postage, anything i/we should know about it. Milage on the crank etc. My firefox translator isnt translating the page at all :S
Title: German to English
Post by: keflaman on May 21, 2008, 11:26:54 AM: Quote from: Letsplayskatch;49799

I'm really terrible at German, despite studying it for 3 years... :(
Could comeone please translate the important stuff for me :)

Euro 500 = $802.46 (approximately)
Title: Hartge 91 mm stroke crankshaft in german ebay now!
Post by: Letsplayskatch on May 21, 2008, 01:55:58 PM: Cheers chap :)

Well I googled the page via their amazing translation service (LOL) and I managed to get the gist of what he was saying in the listing.
I sent him a few emails too and he says the crank has done 8500KM (!) only, and he has more - New - in stock for 980Euro. Bargin IMHO :cool:
Title: Hartge 91 mm stroke crankshaft in german ebay now!
Post by: swiss318is on May 22, 2008, 04:40:03 AM: there is nothing very important.. its a 91mm hartge crank for a 2.1l stroker, doesnt fit the m44 only m42/m43
apart of that, he has a fully machined m42 block, rods and pistons.. ask for prices..!
Title: Hartge 91 mm stroke crankshaft in german ebay now!
Post by: beegeezy on May 23, 2008, 12:23:14 AM: whats the stroke on the m47 crank?
Title: Hartge 91 mm stroke crankshaft in german ebay now!
Post by: strypt on May 23, 2008, 01:38:57 AM: 88 mm.
Title: Hartge 91 mm stroke crankshaft in german ebay now!
Post by: Boyracer on May 27, 2008, 07:43:20 AM: This item went for 754€ (about 1200 USD).