M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Exterior => Topic started by: Alexx on April 30, 2008, 01:28:46 PM

Title: Plate filler.
Post by: Alexx on April 30, 2008, 01:28:46 PM

I just received my European plate filler for my 1991 BMW 318is. How do install this part on the car ? Help is what I need.

Title: Plate filler.
Post by: sumyungguy on April 30, 2008, 02:36:32 PM

I just did mine a couple weeks ago..

Take off the plate and the interior trim in the trunk.
Hold the filler up (make sure its centered) and mark the two holes that need to be drilled from inside the trunk.
Drill the holes
Put your plate back on.

I added some 3m double sided sticky to the back surface of the filler cause it was vibrating.

Title: Plate filler.
Post by: Alexx on April 30, 2008, 02:38:46 PM

http://www.r3vlimited.com/board/showthread.php?t=42630