M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Suspension => Topic started by: DaveM-sport on March 20, 2008, 07:17:07 PM
-
I know this has been covered before.
Going making my own tomoro
D-Clay has done a nice job on them.
What I want to know is what's the thickness I should make the tabs? i.e what plate thickness.
I'm going to make a good few holes along the plate for adjustabilty and this will also help the strength as the tab will be longer hence, more weld having a hold of it:D
If somebody knows the Dia. of the holes and a rough center to center distance for the drop links it would be great too:)
Thanks!
Dave.