M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Electrical => Topic started by: jfdublyu on April 30, 2006, 12:40:30 AM

Title: MSD Ignition
Post by: jfdublyu on April 30, 2006, 12:40:30 AM

Anyone know anything about MSD Ignition upgrades, like applications and part numbers? here's the site http://www.msdignition.com

Title: MSD Ignition
Post by: jfdublyu on April 30, 2006, 12:46:15 AM

or how about just some good quality wires under say $115

Title: MSD Ignition
Post by: Febi Guibo on April 30, 2006, 08:27:35 AM

the grassroots motorsport article showed decent results with magnecor wires... cheaper than bosch OEM...

Title: MSD Ignition
Post by: thumper3ld on April 30, 2006, 09:57:42 AM

Quote from: Febi Guibo

the grassroots motorsport article showed decent results with magnecor wires... cheaper than bosch OEM...

Yeah, im thinking about getting the magnecors for myself. I tried calling msd asking about ignitions for our car but never really got any answers. They dont have anything listed for our car but they have a test that you can run to see if they have anything that will work. Try giving them a call.

Title: MSD Ignition
Post by: jfdublyu on April 30, 2006, 11:56:42 AM

where to buy magnecore wires? anyone got a link for buying convenience? also, i am getting wires to go w/ my already installed bavauto coils (very worth it upgrade, look for the thread if you missed it, try search)

Title: MSD Ignition
Post by: jfdublyu on April 30, 2006, 12:03:08 PM

i found on ebay, but make sure its the set for the DOHC engines like ours and the z3 http://cgi.ebay.com/ebaymotors/MAGNECOR-SPARK-PLUG-WIRES-8-5MM-BMW-318-Z3-45247_W0QQitemZ8045516239QQcategoryZ33692QQssPageNameZWD1VQQrdZ1QQcmdZViewItem

Title: MSD Ignition
Post by: jfdublyu on April 30, 2006, 12:23:41 PM

actually, i found them cheaper. this the cheapest i have found them so far $91.38 for the 8.5mm http://www.apexperformance.net/cartgenie/prodInfo.asp?pid=603&cid=10