M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Electrical => Topic started by: Meister on November 04, 2007, 05:39:06 AM

Title: euro smilie hi/low beam
Post by: Meister on November 04, 2007, 05:39:06 AM

I finally got around to wire up my high beams for my euro smilies that I got a month or so ago.  When I go to turn on the high beams, the low beams turn off.  I've read somewhere that you have to do a jump to the relay. So my question is, how or what is the best or easiest way to do that?  

Just in case you need to know, I went from sealed beams to euro ellips.

Title: euro smilie hi/low beam
Post by: D. Clay on November 04, 2007, 04:15:38 PM

http://www.r3vlimited.com/board/showthread.php?t=59735
post #13 by asubimmer.

Title: euro smilie hi/low beam
Post by: Meister on November 07, 2007, 06:13:52 AM

Cool thanks, do you know what kind of wire i should use or if it's really nessary to solder because I don't have anything to solder with heh