M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => General Topics => Topic started by: longms on October 29, 2007, 12:44:10 PM
-
I am looking to replace the two black strips that are stacked directly above the valence lip. They are about 2 feet in length and about 2-3 inches thick. I can't find them or the part numbers. If anyone has any insight I would greatly appreciate it. Thanks.
-
I am looking to replace the two black strips that are stacked directly above the valence lip. They are about 2 feet in length and about 2-3 inches thick. I can't find them or the part numbers. If anyone has any insight I would greatly appreciate it. Thanks.
I hear the euro bumper fillers cut out out the marker lights. They would be a good replacement but im having a hard time locating some myself
-
I hear the euro bumper fillers cut out out the marker lights. They would be a good replacement but im having a hard time locating some myself
i know where to get them, i have the link saved on my comp at home, there cheap to. i will post when i get home :).
-
also interested but i am talking about the horizontal strips underneath the license plate on the air dam. I am looking to replace these.
-
If you are referring to the 2 black plastic strips that are approxiatly 3 1/2 feet in length and go through the center of the front bumper, where the turn signal lights are, then their numbers are 51 11 1 971 615, and 51 11 1 971 616. I believe they are called the front impact strips. I bought mine new from Bavarian Auto Recycling, 1-800-726-4269 for $35.84 each. I hope this helps.
-
abraham motorsports has the euro bumper trip that deletes the sidemarkers, you can also get them from the dealer...
euro part # as follows (front L-R, rear L-R)
51 12 1 945 927
51 12 1 945 928
51 11 1 945 907
51 11 1 945 908
-
abraham motorsports has the euro bumper trip that deletes the sidemarkers, you can also get them from the dealer...
euro part # as follows (front L-R, rear L-R)
51 12 1 945 927
51 12 1 945 928
51 11 1 945 907
51 11 1 945 908
http://www.abrahamsmotorsport.com/e30.htm, damn, you beat me to it!
i think he is talking about the plastic covers for the two slits in the lower valence. the slits used for the oil cooler in the M20 E30's.
http://www.realoem.com/bmw/showparts.do?model=AF93&mospid=47305&btnr=51_0721&hg=51&fg=20
#13 and #14 above. http://www.bpmd.com sells them.
the ones for our car are solid, while the ones for the M20 are vented, i recomend the vented ones, they look alot cooler! and the upper slit is not supposed to have anything in it (in europe it was covered).