M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Exterior => Topic started by: FL318is on October 25, 2007, 12:10:54 PM
-
Finally getting some time off. Working on carpet removal.
So far so good. I am trying to figure out 2 things.
1) How to removal the acc pedal?
2) Cutting the carpet under the heater/dash seems to be the easiest, but where do I cut? Any diagrams?
Thanks. I should have a beir whilst I ponder.
-
The pedal has wedgie type plastic retainers on the tab that goes through the carpet and into the floor. I pried the base of the pedal straight up with a screwdriver in several places and it snapped back in after reinstalling the carpet. You also have to take a clip off of the top and slide out the rod that goes through the firewall.
I cut the carpet after removing the console leaving the least amount I could under the A/C heater box. There was plenty to tuck back under the console.
-
Thanks Clay.
Let the prying begin!
-
I pryed and pryed. Nothing except I think I am deforming the plastic. Any suggestions?