M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => General Topics => Topic started by: jrobie79 on October 01, 2007, 01:06:09 PM

Title: exhaust
Post by: jrobie79 on October 01, 2007, 01:06:09 PM

i foosed up my exhaust real bad when i tried to put on a dynomax muffler, now the thing is all bent up and doesnt sit right and vibrates all over the place, where can i get another exhaust setup, i got a welder at home so i could do that, should i see if a shop will bend me some pipe and i could weld it up myself.

Title: exhaust
Post by: oldtimer on October 01, 2007, 09:53:23 PM

you can do the "angle" trick with some 2 1/2 pipes.  For the most part you will find that the only area you will need some bending or angling is pass the rear cross beam to the muffler.  I didn't like how the pipes are seen with the bend so I decided to angle the pipes instead and just weld the joint.