M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Engine management => Topic started by: kowalski on August 18, 2007, 04:36:08 PM

Title: Help, need pinouts for sensors.
Post by: kowalski on August 18, 2007, 04:36:08 PM

I need the TPS pinout, the block temp sensor pinnout, and both crank and cam sensor pinouts.

Title: Help, need pinouts for sensors.
Post by: kowalski on August 19, 2007, 04:43:45 PM

C'mon people!!

Title: Help, need pinouts for sensors.
Post by: ak96ss on August 19, 2007, 05:22:03 PM

Wait, out.

Title: Help, need pinouts for sensors.
Post by: ak96ss on August 19, 2007, 05:41:17 PM

I'm at work, so I don't have access to my ETM, nor can I get to this webpage: http://wedophones.com/BMWManualsLead.htm (http://wedophones.com/BMWManualsLead.htm). You might try there, see if it works for you.

Title: Help, need pinouts for sensors.
Post by: kowalski on August 19, 2007, 05:45:49 PM

Thanks. I'll search to see if i can find it. I did the TPS, i believe it goes 3,2,1 where 1 is 5v power, 2 is the output, and 3 is the ground.  

Temp sensor, red and brown is output, black and brown is power.  Still need the crank and cam sensor pinnouts tho.