M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => General Topics => Topic started by: e9nine on April 15, 2006, 06:15:49 PM

Title: Anyone have a stock dynosheet?
Post by: e9nine on April 15, 2006, 06:15:49 PM
I finally gave in a decided to see what the hamsters in the engine bay were putting to the ground..I'd now like a stock dyno sheet for comparison.

TIA
Title: Anyone have a stock dynosheet?
Post by: 2002maniac on April 15, 2006, 08:22:26 PM
@ 4500 feet above sea level on a conservative mustang dyno.

(http://img.photobucket.com/albums/v485/2002maniac/101_9954.jpg)
Title: Anyone have a stock dynosheet?
Post by: 2002maniac on April 15, 2006, 08:23:16 PM
what power mods do you have?
Title: Anyone have a stock dynosheet?
Post by: e9nine on April 15, 2006, 08:40:53 PM
I have a Mark D chip as my only mod along with a swiss cheese airbox and a magnaflow muffler (negligble IMO)

I only got 3 pulls sans Air Fuel and I think I gained about 10 hp and 10 lb/ft trq @ the wheels.

I'll post pics when my blood alcohol level is legal and I find my car :eek:
Title: Anyone have a stock dynosheet?
Post by: Febi Guibo on April 16, 2006, 10:23:15 AM
From BP's site:

stock:
(http://www.esatclear.ie/~bpurcell/m42curves.jpg)

with mad irish modz:
(http://www.esatclear.ie/~bpurcell/sprchip.jpg)


There was another stock one up at mwerks, for their project 318is car... but for some reason they took it down, or I can't get their search feature to work (hmmmm, that might be it). I will try to get it


Quote from: e9nine
I'll post pics when my blood alcohol level is legal and I find my car :eek:

check the front yard, and the back yard!
Title: Anyone have a stock dynosheet?
Post by: e9nine on April 16, 2006, 11:34:49 AM
rwhp/rwtq figures..

(http://www.r3vlimited.com/gallery/files/7/5/0/3/dyno.jpg)
Title: Anyone have a stock dynosheet?
Post by: e9nine on April 16, 2006, 11:40:05 AM
I had the car run till redline @ 7250rpm (That's the limit of the chip I have)

I didn't expect power past 6500...perhaps next time around I'll advance the intake cam to see if this makes any difference with the power curves.

My motor is tired @ supposedly 178k mi (burns oil) and I still drive it hard. I am somewhat surprised at the performance. I don't know if I'll ever rebuild it though, I'll just drive it to the ground (if it will get there)
Title: Anyone have a stock dynosheet?
Post by: Gunni on April 16, 2006, 08:18:36 PM
127rwhp??
that is good,
when ever they hold a dyno day locally IŽll have my MAP converted M42 tested, along with any other E30 I may have finished by then
Title: Anyone have a stock dynosheet?
Post by: e9nine on April 16, 2006, 11:27:28 PM
Yeah the graph is hp/tq at the wheels.

I am curious to see what your MAP car with the SMT-6 is gonna put out as well. Not forgetting the MAF kit that is in the works as well
Title: Anyone have a stock dynosheet?
Post by: Gunni on April 17, 2006, 06:59:54 AM
I am as well,
I thinking up a way to build a "CAI" setup that uses a paper filter og a generous size,
I have spent about $500 on the WB kit and SMT unit, altough it was still lying around it was still money, I hope to get as close to 150flwhp as possible.
I just donŽt know how well these engines respond to mods.
Title: Anyone have a stock dynosheet?
Post by: Febi Guibo on April 17, 2006, 09:11:11 AM
wow... 127 at the wheels is impressive!!

The mwerks.com project car (bryan was gracious enough to provide this) made about 104

(http://m42club.com/reference/dyno_sheets/mwerks/dyno.jpg)
Title: Anyone have a stock dynosheet?
Post by: 2002maniac on April 17, 2006, 10:26:57 AM
I'm anxious to see what mine will do after I do the MAF swap.  I have the MarkD chip and Delta cams.
Title: Anyone have a stock dynosheet?
Post by: 2002maniac on April 17, 2006, 10:43:14 AM
I just realized that most chipped M20's have ~140-150whp

We arent that far behind!  (except for the whole torque issue :mad:)
Title: Anyone have a stock dynosheet?
Post by: Vladi on April 19, 2006, 08:04:37 AM
This is my 316i M40+chip. :D