M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Suspension => Topic started by: 1991 318is on July 21, 2007, 10:15:40 AM
-
I'm looking to lower my car (1991 318is) not many places around me that can get springs one place is over $450 because shipping and stuff. But i found a shop that sells B&G springs $275 1.6 drop front and back. any one use them are they good, bad, crap? I be leave this is the link to the ones i can get. http://www.autocarparts.com/part/960/95/ I want my car lowered 1.6 also, so I'm probably going to get them seems cheep. and if any one has pics of a E30 lowered 1.6 pr close to that also would be great.
-
I purchased a used set of these off eBay. I'm pretty happy with them, other than the fact that I thought it lowered the rear of my car too much. So low that my rear wheels were tucked under the fenders. I'm running 16 inch wheels with 45 series sidewall. They did lower the front of the car quite nicely though. and tehy aren't that harsh to drive around with.
-
I purchased a used set of these off eBay. I'm pretty happy with them, other than the fact that I thought it lowered the rear of my car too much. So low that my rear wheels were tucked under the fenders. I'm running 16 inch wheels with 45 series sidewall. They did lower the front of the car quite nicely though. and tehy aren't that harsh to drive around with.
so with stock size tires will the back be under the fender lip?
-
from what I gather they might. I thnik this because the overall diameter+ thichness of the sidewall is .22 inches less that a 14 inch wheel with the thickness of the original tsized tire. someone please correct me if I'm wrong
-
i think i might get the bav autosport springs
-
i think i might get the bav autosport springs
I have a set if you are interested in em.
-
I have a set if you are interested in em.
if i was closer i would be. how do you like them?
-
Hello,
Does anyone have more info or pics of their 318's on B&G springs?
-
Pics anyone??????