M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Swaps, Turbos, Buildups => Topic started by: Tor Arne Kaasen on July 12, 2007, 03:06:27 AM

Title: How to get oil to the turbo
Post by: Tor Arne Kaasen on July 12, 2007, 03:06:27 AM
Hi ther, nead to get oil from the engine to the turbo. can i use http://cgi.ebay.com/ebaymotors/BMW-Oil-Distribution-Block-Gauges-E36-M3-325-ODB-JTD_W0QQcmdZViewItemQQcategoryZ33676QQihZ020QQitemZ300128608757QQrdZ1

ore are ther other ways to get the oil.:confused:
Title: How to get oil to the turbo
Post by: WeirdYo2 on July 15, 2007, 06:10:58 PM
I just use brass fittings that you can get at almost any hardware store and tapped off the oil pressure sensor and have not had a problem yet.
Title: How to get oil to the turbo
Post by: ludiagsm on July 15, 2007, 06:53:42 PM
Quote from: Tor Arne Kaasen;29490
Hi ther, nead to get oil from the engine to the turbo. can i use http://cgi.ebay.com/ebaymotors/BMW-Oil-Distribution-Block-Gauges-E36-M3-325-ODB-JTD_W0QQcmdZViewItemQQcategoryZ33676QQihZ020QQitemZ300128608757QQrdZ1

ore are ther other ways to get the oil.:confused:


that will work , but you can also lessen Werdyio2 advise

why dont you contact with http://www.ticco.com or some of his friends in Norwey
Title: How to get oil to the turbo
Post by: WeirdYo2 on July 18, 2007, 04:50:55 PM
just make sure you get an orifice in to restrict the oil flow.
Title: How to get oil to the turbo
Post by: Tor Arne Kaasen on July 19, 2007, 12:14:42 AM
Quote from: WeirdYo2;29900
just make sure you get an orifice in to restrict the oil flow.


Do you mean restrictor,
http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-OIL-021&Category_Code=GTBB

the Garrett GT seris has a restrictor biltdt in the char.
Is`t that ok with that one?:confused:
Title: How to get oil to the turbo
Post by: WeirdYo2 on July 21, 2007, 09:09:32 PM
yeah, restrictor, same thing, just as long as you dont go dumping massive amounts of oil through the turbo or starving the turbo of oil you should be set.