M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Swaps, Turbos, Buildups => Topic started by: Lord Jax on June 18, 2007, 02:16:34 PM

Title: Carbs / ITBs
Post by: Lord Jax on June 18, 2007, 02:16:34 PM

Can anyone show me Carb or ITB setups on the m42? Any hp/tq performance info would be cool too :D

Title: Carbs / ITBs
Post by: steve321 on June 30, 2007, 05:49:36 AM

(http://i34.photobucket.com/albums/d117/stevemitchell321/enginetogether1.jpg)
(http://i34.photobucket.com/albums/d117/stevemitchell321/enginetogether2.jpg)
(http://i34.photobucket.com/albums/d117/stevemitchell321/PICT0005small.jpg)
(http://i34.photobucket.com/albums/d117/stevemitchell321/ITBsonhead3.jpg)
(http://i34.photobucket.com/albums/d117/stevemitchell321/ITBsonhead7.jpg)

theres my baby, my M44 bottom end should be with me later today and i can start work on it, so i have a 2L bottom using the M44 crank and rods, but a wider piston so it will still be quite short stroke, nice and revvy :D. i have a gasflowed head, custom (home made) exhaust. i'd like around 215-220bhp once i'm all finished but i know thats a while off yet.

steve
________
Glass Pipe Pictures (http://glasspipes.net/)

Title: Carbs / ITBs
Post by: romkasponka on June 30, 2007, 11:36:16 AM

front antiroll bar is from E36? 25mm?

Title: Carbs / ITBs
Post by: steve321 on June 30, 2007, 01:07:20 PM

25.5mm i think
________
Ford motor company philippines specifications (http://www.ford-wiki.com/wiki/Ford_Motor_Company_Philippines)

Title: Carbs / ITBs
Post by: D. Clay on June 30, 2007, 01:50:31 PM

Where do you get them nifty valve covers.

Title: Carbs / ITBs
Post by: romkasponka on June 30, 2007, 02:01:46 PM

Quote from: steve321;28839

25.5mm i think

What size is in the rear? And from which car?

And how car after that handles?

Title: Carbs / ITBs
Post by: steve321 on June 30, 2007, 02:23:55 PM

the front is the standard one, and i have an M3 19mm on the rear.

thats the standard valve cover i just took the grinder to it, and then had it powder coated, i'm well pleased with it, cos you dont see many like that :D

steve
________
HONDA CBR600RR HISTORY (http://www.honda-wiki.org/wiki/Honda_CBR600RR)

Title: Carbs / ITBs
Post by: nuvolarossa on June 30, 2007, 03:52:26 PM

Quote from: romkasponka;28842

What size is in the rear? And from which car?
 
And how car after that handles?

He own a 318is e36, not e30:rolleyes:

Title: Carbs / ITBs
Post by: Alpine003 on July 03, 2007, 12:25:48 PM

Quote from: steve321;28843

thats the standard valve cover i just took the grinder to it, and then had it powder coated, i'm well pleased with it, cos you dont see many like that :D

steve

Purdy :cool:

Title: Carbs / ITBs
Post by: jiggaboo jones on July 31, 2007, 12:18:44 AM

who cares about the sway bar whered you get the itb's

Title: Carbs / ITBs
Post by: steve321 on August 12, 2007, 06:02:48 AM

e36 m3 evo off ebay cost me ?140 i think

steve
________
Essential Vaaapp (http://essentialvaaappvaporizer.com)

Title: Carbs / ITBs
Post by: kowalski on August 12, 2007, 10:43:42 PM

Quote from: steve321;31476

e36 m3 evo off ebay cost me £140 i think

steve

I thought the port spacing was different then the m42's...

never mind, i thought it said e30 m3..