M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Suspension => Topic started by: GrippyDrifty on April 10, 2006, 12:50:25 AM
-
thanks for your comments/responses regarding my leaky rack (double entendre:p ).
Well, after reading the following write up on e30tech, I am going PS less.
http://kbdlock.ath.cx/~atmh/e30/powersteer.html
But, I thought of a short cut for the time being. It is much easier to just remove the pump and loop the hoses that went to the pump. That way, since I am obviously having a leakage problem, I could top it up easier if necesary. I will be runnning some lucas stop leak through it before I remove the pump, for some peace-of-mind. I'm sure this will get rid of my leak issue and give me a free MANUAL rack!!!!:D
Check out the diagram:
(http://i5.photobucket.com/albums/y193/bokunopics/fk8svo.jpg)
-
sounds cool, let us know how hard the parking lots ect. are
-
Oh, trust me, I'll let you know how parking goes. I live in SF--one of the crappiest cities to live in regarding parking.:(
-
Forget the stop leak.
On racks, it will not only not work, but will likely make the problem worse. I added some leak stop to mine, it helped at first, but after it only got worse.
-
do not use stop leak, it will wreck ur pump and clogg your rack. i'v ran it through twice and my pump went twice, now i just disconnected it.
-
Ok. Thanks for the advice. I'll just remove the PS pump and loop the line without the stop leak. Without the pressure from the pump, it should'nt leak anyways.