M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Electrical => Topic started by: 320is_m42 on April 08, 2007, 12:28:52 PM
-
i have a 91 318is wiring harness that i am trying to convert to a 83 e21 wiring harness,this harness has all relays and sensors intact. at the c101 plug the wiring is as follows.
pin 1 blue alt charge warning
pin 2 empty
pin 3 empty
pin 4 br/vi temp sensor
pin 5 bk/br oil pressure
pin 6 gr/yl unknown
pin 7 gn ignition
pin 8 yl/wt unknown
pin 9 bk tach
pin 10 empty
pin 11 wt/bl unknown
pin 12 br/bk unknown
pin 13 vi/rd fuel pump
pin 14 bk/yl oil level sensor ?
pin 15 bk/gr starter small connector
pin 16 wt/bk unknown
pin 17 empty
pin 18 bk/yl starter large connector
pin 19 empty
pin 20 yl/rd abs brakes ???
can anyone help fill in the blanks on this harness or tell me if the ones that i have are right.
-
well, we have this posted here:
http://ee1394.com/bmw/docs/e30_91.pdf
if that doesn't help, give a yell and we can research it more throughly...
edit:
I know that to reset the service light, you jump pins 7 and 19 (7 = inspection, 19 = ground)
see attachment for info from the 88-90 325i
-
after scanning the pdf file i found a couple more of the wires needed but the document doesnt show
pins 6 gr/yl
pin 7 green ignition
pin 8 yl/wt my mistake
pin 11 wt/bl
pin 12 br/bk
pin 16 wt/bk
or i didnt find them
any help
what is the SRS computer
-
hmmm, well, from personal experience pin #7 is definitely the service indicator --i've reset my service lights a couple of times...
on page 24 of the 1991 electrical guide, the wt/bk runs from the SRS computer to the c101, so that would be pin #16.
on the same page, there's a br/bk line from the SRS computer to the warning module in our (pathetic) 2 light check panel, and considering that would be reset from the plug, that would be a good candidate for pin #12.
which leaves us with pin #6 and #11.... sigh!
-
bumpeth
(http://ee1394.com/bmw/docs/factory/repair/en/repair/images/0191.jpg)
-
bumpeth
(http://ee1394.com/bmw/docs/factory/repair/en/repair/images/0191.jpg)
Curious where you got that picture, I'm in need of one for a 94 325.
Thanks febi...