M42club.com - Home of the BMW E30/E36 318i/iS
DISCUSSION => Engine + Driveline => Topic started by: megavolt on August 31, 2017, 09:38:03 PM
-
I've had too much delay between disassembling my intake to fix all the split rubber hoses and re-installation of new parts. While I took plenty of pics, this hose failed to make an appearance. Can someone help me with the location? 1993 318is.
-
Goes from ICV to far hole in the bottom of intake boot. Pic you show looks like the part that goes to ICV + TB heater plate. You need 1 more piece of hose to reach the intake boot.
-
Thanks 1998ccc. I've searched realoem to no avail. I found the image with a reference to this hose in the parts list, but the hose isn't in the picture. Replacement hoses I purchased are below. If anyone has an image in their archives that might help, it would be greatly appreciated.
-
Google just found this which seems helpful.
http://www.e30zone.net/e30zonewiki/index.php/Removing_M42_Throttle_Body_Heater (http://www.e30zone.net/e30zonewiki/index.php/Removing_M42_Throttle_Body_Heater)