M42club.com - Home of the BMW E30/E36 318i/iS

PAPER OR PLASTIC => For Sale => Topic started by: evbrad2002 on February 02, 2016, 12:29:28 PM

Title: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: evbrad2002 on February 02, 2016, 12:29:28 PM
*Update:  have sold several pieces but still have most of car...very busy, so slow going...will still be a while before I have time to pull tranny/clutch exhaust, etc..thanks for the patience.  Meanwhile, still able to do easier access/ship stuff.

I am parting out my e30 318is.  Engine is toast (sudden oil loss due to shattered oil pan from pot hole). 170k on the odometer.  Color is diamond Schwarz...has had a repaint in its history...fair.  Euro front bumper setup (turn signals on fender not on bumper). Interior black...driver's seat shows moderate+ wear, passenger and rears in very good shape.  Only able to pull relatively smaller, easier to access/ship parts at this time, so if you're interested in interior/exterior trim pieces, lights, easily accessible engine bay let me know.  Parting out a vehicle is new to me and time is an issue so please be patient as I figure up prices, shipping, get things pulled etc.

Will still be a while before I'll be in a position to pull more involved items (have new clutchmasters clutch with recently refreshed JB racing flywheel, supersprint muffler, bilstein HDs). Wheels are original 14" basketweaves, overall in good shape, some curb rash, missing one center cap, spare has rash/dent but is serviceable.  Tires have good tread, two falken, and two other(can't recall brand at the moment).  This car was just a fun daily driver. Have had it for five years.  You will see some posts from a year or two ago on this forum on which I was sorting out timing case rebuild...which was successful thanks to the help from this forum...sadly, now, death by pot hole...

Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: Darky on February 03, 2016, 12:17:23 AM
Hi

Suprised Your oil pressure light didn't come on?
Photos?

Cheers Rohan
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: evbrad2002 on February 03, 2016, 07:52:32 AM
Hi

Suprised Your oil pressure light didn't come on?
Photos?

Cheers Rohan

I'm sure the oil light did come on...a bit of a touchy subject...I wasn't driving the car...
Will get some photos up in the next day or two. 
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: Darky on February 03, 2016, 08:22:45 PM
Ouch!!!!!
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: keflaman on February 03, 2016, 08:28:16 PM
Hi

Suprised Your oil pressure light didn't come on?
Photos?

Cheers Rohan

I'm sure the oil light did come on...a bit of a touchy subject...I wasn't driving the car...
Will get some photos up in the next day or two.

Oh, a married man. (Sorry about your bad luck)
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: Nick_318is on February 07, 2016, 10:48:22 AM
Did the car have working AC? If so I'd be interested in the compressor.
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: benz-tech on February 08, 2016, 12:37:11 AM
I'm looking for engine bay trim, i.e. The wiring loom cover and the covers right behind the headlamps. Lmk what you got.
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: e3091318is on February 10, 2016, 04:36:07 AM
I am parting out my e30 318is.  Engine is toast (sudden oil loss due to shattered oil pan from pot hole). 170k on the odometer.  Color is diamond Schwarz...has had a repaint in its history...fair.  Euro front bumper setup (turn signals on fender not on bumper). Interior black...driver's seat shows moderate+ wear, passenger and rears in very good shape.  Only able to pull relatively smaller, easier to access/ship parts at this time, so if you're interested in interior/exterior trim pieces, lights, easily accessible engine bay let me know.  Parting out a vehicle is new to me and time is an issue so please be patient as I figure up prices, shipping, get things pulled etc.

Will be a couple of weeks+ or so before I'll be in a position to pull more involved items (have new clutchmasters clutch with recently refreshed JB racing flywheel, supersprint muffler, bilstein HDs). Wheels are original 14" basketweaves, overall in good shape, some curb rash, missing one center cap, spare has rash/dent but is serviceable.  Tires have good tread, two falken, and two other(can't recall brand at the moment).  This car was just a fun daily driver. Have had it for five years.  You will see some posts from a year or two ago on this forum on which I was sorting out timing case rebuild...which was successful thanks to the help from this forum...sadly, now, death by pot hole...

I have pulled the ECU with Turner Motorsport Performance Chip.  Will sell Chip for $90 shipped, ECU with Chip for $135 shipped.
Also have less than 5 month old correct Interstate Battery - MTP 91/T6 - 700CCA, 6 year battery.  Retails for around $160. Will sell for $80 + actual shipping.  Prefer Payment via paypal.

Hey I am interested in the instrument cluster, clock, AC switch, rear speakers, tweeters, antenna, center caps (if willing to seperate), and one of the seat belt receivers would be cool. 
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: LateralGs on February 15, 2016, 12:06:46 PM
Interested in the euro front bumper. got door trim also?
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: LateralGs on February 15, 2016, 12:08:45 PM
also I've toyed with the idea of getting the chip...what did you notice from it? Worth getting? you're slightly biased since you have one you'd like to sell...but tell me about it please.

also, did your car have a modified exhaust? I'd be interested if you had a supersprint or something interesting.
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: turboe60 on February 17, 2016, 12:21:05 PM
Got the chip.  Great transaction.  Thanks evbrad2002!
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: colin86325 on February 18, 2016, 10:57:16 AM
Hi there, are you selling any window switches?  I might be interested in 2 if you have them.
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: 318isbits on March 01, 2016, 08:24:49 AM
Hello , Evbrad2002 here... sorry for the lack of response to inquiries!  I have been caught up in the ban problem along with others and just now able to register an alternative username.  I have sent PM to Desktop Dave and hope to have this resolved soon.  Meanwhile, best to reach me via e-mail (evbrad2002@yahoo.com)
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: DesktopDave on March 01, 2016, 08:44:03 AM
Hello , Evbrad2002 here... sorry for the lack of response to inquiries!  I have been caught up in the ban problem along with others and just now able to register an alternative username.  I have sent PM to Desktop Dave and hope to have this resolved soon.  Meanwhile, best to reach me via e-mail (evbrad2002@yahoo.com)

Resolved! Sorry about that. Good luck with your sales, thanks for putting it up here.

Wish I was closer, I need a few things myself.
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: evbrad2002 on March 03, 2016, 08:53:31 AM
Thanks for resolving this so quickly DesktopDave.  I think I've gotten caught up on responses to inquiries.  If I missed someone, let me know.  Several bits gone, but much/most still available.  Slow going and still will be a while before I can get the exhaust, trans, clutch etc, pulled.  Meanwhile can continue to make progress on easier to access items.  Thanks for the patience and interest thus far.
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: pandaboo on March 22, 2016, 10:11:21 PM
I'm interested in one of the A/C lines. The short one that runs from the compressor to the condenser.
Looks like this
(https://c1552172.ssl.cf0.rackcdn.com/643623_x600.jpg)
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: tmacbmw74 on March 26, 2016, 07:44:16 PM
I emailed you directly with my parts requests
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: DesktopDave on March 29, 2016, 07:03:54 PM
I'm not sure why this thread was locked...so I unlocked it.  ;D GLWS!!
Title: Re: 1991 318is (e30) Part Out Turner Chip Jackson, MS
Post by: $C300 on August 03, 2016, 06:34:58 PM
Any chance the engine harness is still available?