M42club.com - Home of the BMW E30/E36 318i/iS

DISCUSSION => Engine management => Topic started by: cristimm on June 05, 2015, 12:36:02 PM

Title: Problems with INPA connecting to DME
Post by: cristimm on June 05, 2015, 12:36:02 PM

Hi all,

I have trouble connecting to DME with INPA. The engine is a M42B18 from 1993 (E36). I do have the correct interface (see below) and a laptop with native serial port. I have fresh Windows XP 32 bit install and I have tried various INPA kits with the same result (see picture). I can connect to other modules but not DME.

Can anybody help me?

(http://www.one-stop-electronics.com/shop/images/detailed/ADS1_small.jpg)

(https://dl.dropboxusercontent.com/u/649244/tmp/eroare%20inpa.jpg)

Title: Re: Problems with INPA connecting to DME
Post by: cristimm on June 09, 2015, 12:44:03 PM

Below is a picture with my connector:

(https://dl.dropboxusercontent.com/u/649244/tmp/conectorul%20meu%20rotund.jpg)